SN74ALVCHS162830GR 供应商
-
SN74ALVCHS162830GR
品牌：TI 封装/批号：原厂原装/22+ -
SN74ALVCHS162830GR
品牌：TI(德州仪器) 封装/批号：TSSOP-80/2022+ -
SN74ALVCHS162830GR
品牌：TI代理 封装/批号：TSSOP80/23+ -
SN74ALVCHS162830GR
品牌：TI 封装/批号：TSSOP/23+
SN74ALVCHS162830GR 属性参数
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：逻辑 - 缓冲器，驱动器，接收器，收发器
- 系列：74ALVCHS
- 逻辑类型：1 位至 2 位地址驱动器
- 元件数：2
- 每个元件的位元数：9
- 输出电流高，低：12mA，12mA
- 电源电压：2.3 V ~ 3.6 V
- 工作温度：-40°C ~ 85°C
- 安装类型：表面贴装
- 封装/外壳：80-TFSOP （0.240"，6.10mm 宽）
- 供应商设备封装：80-TSSOP
- 包装：®
- 其它名称：296-6293-6
产品特性
- Member of the Texas Instruments Widebus™ Family
- Output Ports Have Equivalent 26- Series Resistors, So No External Resistors Are Required
- Diodes on Inputs Clamp Overshoot
- Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
- Latch-Up Performance Exceeds 250 mA Per JESD 17
- ESD Protection Exceeds JESD 22 2000-V Human-Body Model (A114-A) 200-V Machine Model (A115-A)
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
产品概述
This 1-bit to 2-bit address driver is designed for 2.3-V to 3.6-V VCC operation.Diodes to VCC have been added on the inputs to clamp overshoot.Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.The outputs, which are designed to sink up to 12 mA, include equivalent 26- series resistors to reduce overshoot and undershoot.To ensure the high-impedance state during power up or power down, the output-enable (OE)\ input should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
SN74ALVCHS162830GR