74ABT162245DLRG4 供应商
-
74ABT162245DLRG4
品牌：TI 封装/批号：原厂原装/22+
74ABT162245DLRG4 属性参数
- 标准包装：1,000
- 类别：集成电路 (IC)
- 家庭：逻辑 - 缓冲器，驱动器，接收器，收发器
- 系列：74ABT
- 逻辑类型：收发器，非反相
- 元件数：2
- 每个元件的位元数：8
- 输出电流高，低：32mA，64mA
- 电源电压：4.5 V ~ 5.5 V
- 工作温度：-40°C ~ 85°C
- 安装类型：表面贴装
- 封装/外壳：48-BSSOP（0.295"，7.50mm 宽）
- 供应商设备封装：48-SSOP
- 包装：带卷 (TR)
产品特性
- Members of the Texas Instruments Widebus™ Family
- A-Port Outputs Have Equivalent 25- Series Resistors, So No External Resistors Are Required
- Typical VOLP (Output Ground Bounce) <1 V at VCC = 5 V, TA = 25°C
- Distributed VCC and GND Pins Minimize High-Speed Switching Noise
- Ioff Supports Partial-Power-Down Mode Operation
- Flow-Through Architecture Optimizes PCB Layout
- Latch-Up Performance Exceeds 500 mA Per JESD 17
- ESD Protection Exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A)
产品概述
The ’ABT162245 devices are 16-bit noninverting
3-state transceivers designed for synchronous
two-way communication between data buses.
The control-function implementation minimizes
external timing requirements.These devices can be used as two 8-bit
transceivers or one 16-bit transceiver. They allow
data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable
(OE)\ input can be used to disable the device so that the buses effectively are isolated.The A-port outputs, which are designed to source or sink up to 12 mA, include equivalent 25- series resistors
to reduce overshoot and undershoot.These devices are fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the
outputs, preventing damaging current backflow through the devices when they are powered down.To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
74ABT162245DLRG4