SN74ALVC245DGVR 供应商
-
SN74ALVC245DGVR
品牌：TI 封装/批号：原厂原装/22+ -
SN74ALVC245DGVR
品牌：TI(德州仪器) 封装/批号：TVSOP-20/2022+
SN74ALVC245DGVR 属性参数
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：逻辑 - 缓冲器，驱动器，接收器，收发器
- 系列：74ALVC
- 逻辑类型：收发器，非反相
- 元件数：1
- 每个元件的位元数：8
- 输出电流高，低：24mA，24mA
- 电源电压：1.65 V ~ 3.6 V
- 工作温度：-40°C ~ 85°C
- 安装类型：表面贴装
- 封装/外壳：20-TFSOP（0.173"，4.40mm 宽）
- 供应商设备封装：20-TVSOP
- 包装：®
- 其它名称：296-5137-6
产品特性
- Operates From 1.65 V to 3.6 V
- Max tpd of 3.4 ns at 3.3 V
- ±24-mA Output Drive at 3.3 V
- Latch-Up Performance Exceeds 250 mA Per JESD 17
产品概述
This octal bus transceiver is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVC245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated.To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
SN74ALVC245DGVR