SN74ALVC244IPWREP 供应商
-
SN74ALVC244IPWREP
品牌：TI 封装/批号：原厂原装/22+ -
SN74ALVC244IPWREP
品牌：TI(德州仪器) 封装/批号：TSSOP-20/2022+
SN74ALVC244IPWREP 属性参数
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：逻辑 - 缓冲器，驱动器，接收器，收发器
- 系列：74ALVC
- 逻辑类型：缓冲器/线路驱动器，非反相
- 元件数：2
- 每个元件的位元数：4
- 输出电流高，低：24mA，24mA
- 电源电压：1.65 V ~ 3.6 V
- 工作温度：-40°C ~ 85°C
- 安装类型：表面贴装
- 封装/外壳：20-TSSOP（0.173"，4.40mm 宽）
- 供应商设备封装：20-TSSOP
- 包装：®
- 其它名称：296-19504-6
产品特性
- Controlled Baseline One Assembly/Test Site, One Fabrication Site
- One Assembly/Test Site, One Fabrication Site
- Enhanced Diminishing Manufacturing Sources (DMS) Support
- Enhanced Product-Change Notification
- Qualification Pedigree(1)
- Operates From 1.65-V to 3.6-V VCC
- Max tpd of 2.8 ns at 3.3-V VCC
- ±24-mA Output Drive at 3.3-V VCC
- Latch-Up Performance Exceeds 250 mA Per JESD 17
- ESD Protection Exceeds JESD 22 2000-V Human-Body Model (A114-A) 200-V Machine Model (A115-A) 1000-V Charged-Device Model (C101)
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
产品概述
This octal buffer/line driver is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVC244 is organized as two 4-bit line drivers with separate output-enable (OE)\ inputs. When OE\ is low, the device passes data from the A inputs to the Y outputs. When OE\ is high, the outputs are in the high-impedance state.To ensure the high-impedance state during power up or power down, OE\ shall be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
SN74ALVC244IPWREP