SN74ACT244IDWREP 供应商
-
SN74ACT244IDWREP
品牌：TI 封装/批号：原厂原装/22+
SN74ACT244IDWREP 属性参数
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：逻辑 - 缓冲器，驱动器，接收器，收发器
- 系列：74ACT
- 逻辑类型：缓冲器/线路驱动器，非反相
- 元件数：2
- 每个元件的位元数：4
- 输出电流高，低：24mA，24mA
- 电源电压：4.5 V ~ 5.5 V
- 工作温度：-40°C ~ 85°C
- 安装类型：表面贴装
- 封装/外壳：20-SOIC（0.295"，7.50mm 宽）
- 供应商设备封装：20-SOIC
- 包装：®
- 其它名称：296-19502-6
产品特性
- Controlled Baseline One Assembly/Test Site, One Fabrication Site
- One Assembly/Test Site, One Fabrication Site
- Extended Temperature Performance of up to -55°C to 125°C
- Enhanced Diminishing Manufacturing Sources (DMS) Support
- Enhanced Product-Change Notification
- Qualification Pedigree(1)
- 4.5-V to 5.5-V VCC Operation
- Inputs Accept Voltages to 5.5 V
- Max tpd of 9.5 ns at 5 V
- Inputs Are TTL Compatible
产品概述
The SN74ACT244-EP octal buffer/driver is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.The device is organized as two 4-bit buffers/drivers with separate output-enable (OE) inputs. When OE is low, the device passes noninverted data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state.To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
SN74ACT244IDWREP