SN74ABT5402ADW 供应商
-
SN74ABT5402ADW
品牌：TI 封装/批号：原厂原装/22+ -
SN74ABT5402ADW
品牌：TI(德州仪器) 封装/批号：SOIC-28/2022+
SN74ABT5402ADW 属性参数
- 标准包装：20
- 类别：集成电路 (IC)
- 家庭：逻辑 - 缓冲器，驱动器，接收器，收发器
- 系列：74ABT
- 逻辑类型：缓冲器/线路驱动器，非反相
- 元件数：1
- 每个元件的位元数：12
- 输出电流高，低：12mA，12mA
- 电源电压：4.5 V ~ 5.5 V
- 工作温度：-40°C ~ 85°C
- 安装类型：表面贴装
- 封装/外壳：28-SOIC（0.295"，7.50mm 宽）
- 供应商设备封装：28-SOIC
- 包装：管件
- 其它名称：296-33629-5SN74ABT5402ADWTISN74ABT5402ADWTI-ND
产品特性
- Output Ports Have Equivalent 25- Series Resistors, So No External Resistors Are Required
- State-of-the-Art EPIC-II BTM BiCMOS Design Significantly Reduces Power Dissipation
- Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17
- Typical VOLP (Output Ground Bounce) < 1 V at VCC = 5 V, TA = 25°C
- Typical VOLV (Output Undershoot) < 0.5 V at VCC = 5 V, TA = 25°C
- Package Options Include Plastic Small-Outline (DW) Package and Ceramic Chip Carriers (FK) and DIPs (JT) EPIC-IIB is a trademark of Texas Instruments Incorporated.
产品概述
These 12-bit buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.
The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable (OE1\ or OE2\) input is high, all 12 outputs are in the high-impedance state.
The outputs, which are designed to source or sink up to 12 mA, include equivalent 25-
series resistors to reduce overshoot and undershoot.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN54ABT5402A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT5402A is characterized for operation from -40°C to 85°C.
SN74ABT5402ADW