SN74ABT2827DWR 供应商
-
SN74ABT2827DWR
品牌：TI 封装/批号：原厂原装/22+
SN74ABT2827DWR 属性参数
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：逻辑 - 缓冲器，驱动器，接收器，收发器
- 系列：74ABT
- 逻辑类型：缓冲器/线路驱动器，非反相
- 元件数：1
- 每个元件的位元数：10
- 输出电流高，低：12mA，12mA
- 电源电压：4.5 V ~ 5.5 V
- 工作温度：-40°C ~ 85°C
- 安装类型：表面贴装
- 封装/外壳：24-SOIC（0.295"，7.50mm 宽）
- 供应商设备封装：24-SOIC
- 包装：®
- 其它名称：296-3974-6
产品特性
- Output Ports Have Equivalent 25- Series Resistors, So No External Resistors Are Required
- State-of-the-Art EPIC-IIBTM BiCMOS Design Significantly Reduces Power Dissipation
- Flow-Through Architecture Optimizes PCB Layout
- Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17
- Typical VOLP (Output Ground Bounce) < 1 V at VCC = 5 V, TA = 25°C
- Package Options Include Plastic Small-Outline (DW) Package, Ceramic Chip Carriers (FK), and Plastic (NT) and Ceramic (JT) DIPs EPIC-IIB is a trademark of Texas Instruments Incorporated.
产品概述
These 10-bit buffers or bus drivers provide a high-performance bus
interface for wide data paths or buses carrying parity.The 3-state control gate is a 2-input AND gate with active-low
inputs so that if either output-enable ( or ) input is high, all ten outputs
are in the high-impedance state. The 'ABT2827 provide true data at
their outputs.To ensure the high-impedance state during power up or power down,
should be tied
to VCC through a pullup resistor; the minimum value of the
resistor is determined by the current-sinking capability of the
driver.The outputs, which are designed to source or sink up to 12 mA,
include equivalent 25-
series resistors to reduce overshoot and undershoot.The SN54ABT2827 is characterized for operation over the full
military temperature range of -55°C to 125°C. The
SN74ABT2827 is characterized for operation from -40°C to
85°C.
SN74ABT2827DWR