SN74ABT126D 供应商
-
SN74ABT126D
品牌：TI 封装/批号：原厂原装/22+ -
SN74ABT126DBR
品牌：TI 封装/批号：14SSOP/2019+ -
SN74ABT126DBR
品牌：TI 封装/批号：/21+ -
SN74ABT126DR
品牌：TI 封装/批号：SOP-14/ -
SN74ABT126DR
品牌：TI/德州仪器 封装/批号：SOP3.9/21+ -
SN74ABT126DR
品牌：TI 封装/批号：/2021+ -
SN74ABT126DR
品牌：TI(德州仪器) 封装/批号：SOIC-14_150mil/2022+
SN74ABT126D 属性参数
- 标准包装：50
- 类别：集成电路 (IC)
- 家庭：逻辑 - 缓冲器，驱动器，接收器，收发器
- 系列：74ABT
- 逻辑类型：缓冲器/线路驱动器，非反相
- 元件数：4
- 每个元件的位元数：1
- 输出电流高，低：32mA，64mA
- 电源电压：4.5 V ~ 5.5 V
- 工作温度：-40°C ~ 85°C
- 安装类型：表面贴装
- 封装/外壳：14-SOIC（0.154"，3.90mm 宽）
- 供应商设备封装：14-SOIC
- 包装：管件
- 其它名称：296-1020-5
产品特性
- Typical VOLP (Output Ground Bounce) <1 V at VCC = 5 V, TA = 25°C
- High-Impedance State During Power Up and Power Down
- High-Drive Outputs (–32-mA IOH, 64-mA IOL)
- Ioff and Power-Up 3-State Support Hot Insertion
- Latch-Up Performance Exceeds 500 mA Per JESD 17
- ESD Protection Exceeds JESD 22 2000-V Human-Body Model (A114-A) 200-V Machine Model (A115-A)
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
产品概述
The ’ABT126 bus buffer gates feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is low.When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
SN74ABT126D