SN64BCT25245DW 供应商
-
SN64BCT25245DW
品牌：TI 封装/批号：原厂原装/22+
SN64BCT25245DW 属性参数
- 标准包装：25
- 类别：集成电路 (IC)
- 家庭：逻辑 - 缓冲器，驱动器，接收器，收发器
- 系列：64BCT
- 逻辑类型：收发器，非反相
- 元件数：1
- 每个元件的位元数：8
- 输出电流高，低：-
- 电源电压：4.5 V ~ 5.5 V
- 工作温度：-40°C ~ 85°C
- 安装类型：表面贴装
- 封装/外壳：24-SOIC（0.295"，7.50mm 宽）
- 供应商设备封装：24-SOIC
- 包装：管件
- 其它名称：296-33553-5SN64BCT25245DW-ND
产品特性
- State-of-the-Art BiCMOS Design Significantly Reduces ICCZ
- Designed to Facilitate Incident-Wave Switching for Line Impedances of 25 or Greater
- Distributed VCC and GND Pins Minimize Noise Generated by the Simultaneous Switching of Outputs
- Data Flow-Through Pinout (All Inputs on Opposite Side From Outputs)
- High-Impedance State During Power Up and Power Down
- ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 3015
- Package Options Include Plastic Small-Outline (DW) Packages and Standard Plastic 300-mil DIPs (NT)
产品概述
The SN64BCT25245 is a 25-
octal bus transceiver designed for asynchronous communication between
data buses. It improves both the performance and density of 3-state
memory address drivers, clock drivers, and bus-oriented transceivers.
The device allows data transmission from the A bus to the B bus or
from the B bus to the A bus depending upon the logic level at the
direction-control (DIR) input. The output-enable () input can disable the device so
that both buses are effectively isolated.This transceiver is capable of sinking 188-mA IOL,
which facilitates switching 25- transmission lines on the incident wave. The
distributed VCC and GND pins minimize switching noise for
more reliable system operation.The outputs are in a high-impedance state during power up and
power down while the supply voltage is less than approximately 3 V.
The SN64BCT25245 is characterized for operation from -40°C to
85°C and 0°C to 70°C.
SN64BCT25245DW