CLVTH16245AQDGGRQ1 供应商
-
CLVTH16245AQDGGRQ1
品牌：TI 封装/批号：原厂原装/22+ -
CLVTH16245AQDGGRQ1
品牌：TI(德州仪器) 封装/批号：TSSOP-48/2022+
CLVTH16245AQDGGRQ1 属性参数
- 标准包装：2,000
- 类别：集成电路 (IC)
- 家庭：逻辑 - 缓冲器，驱动器，接收器，收发器
- 系列：74LVTH
- 逻辑类型：收发器，非反相
- 元件数：2
- 每个元件的位元数：8
- 输出电流高，低：24mA，24mA
- 电源电压：2.7 V ~ 3.6 V
- 工作温度：-40°C ~ 125°C
- 安装类型：表面贴装
- 封装/外壳：48-TFSOP（0.240"，6.10mm 宽）
- 供应商设备封装：48-TSSOP
- 包装：带卷 (TR)
产品特性
- Qualified for Automotive Applications
- Member of the Texas Instruments Widebus™ Family
- State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low Static-Power Dissipation
- Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC)
- Supports Unregulated Battery Operation Down To 2.7 V
- Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
- Distributed VCC and GND Pins Minimize High-Speed Switching Noise
- Flow-Through Architecture Optimizes PCB Layout
- Ioff and Power-Up 3-State Support Hot Insertion
- Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
- Latch-Up Performance Exceeds 500 mA Per JESD 17
产品概述
The SN74LVTH16245A is a 16-bit (dual-octal) noninverting 3-state transceiver designed for low-voltage (3.3-V)
VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.This device can be used as two 8-bit transceivers or one 16-bit transceiver. It allows data transmission from the
A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR)
input. The output-enable (OE) input can be used to disable the devices so that the buses are isolated.Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors
with bus-hold circuitry is not recommended.
CLVTH16245AQDGGRQ1