CLVC1G125MDCKREP 供应商
-
CLVC1G125MDCKREP
品牌：TI 封装/批号：原厂原装/22+ -
CLVC1G125MDCKREP
品牌：TI(德州仪器) 封装/批号：SC-70-5/2022+ -
CLVC1G125MDCKREP
品牌：TI 封装/批号：原厂原封装/新批号 -
CLVC1G125MDCKREP
品牌：TI 封装/批号：TSSOP/23+
CLVC1G125MDCKREP 属性参数
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：逻辑 - 缓冲器，驱动器，接收器，收发器
- 系列：74LVC
- 逻辑类型：缓冲器/线路驱动器，非反相
- 元件数：1
- 每个元件的位元数：1
- 输出电流高，低：32mA，32mA
- 电源电压：1.65 V ~ 5.5 V
- 工作温度：-55°C ~ 125°C
- 安装类型：表面贴装
- 封装/外壳：6-TSSOP（5 引线），SC-88A，SOT-353
- 供应商设备封装：SC-70-5
- 包装：®
- 其它名称：296-20744-6
产品特性
- Controlled BaselineOne Assembly/Test Site, One Fabrication Site
- One Assembly/Test Site, One Fabrication Site
- Enhanced Diminishing Manufacturing Sources (DMS) Support
- Enhanced Product-Change Notification
- Qualification Pedigree(1)Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
- Supports 5-V VCC Operation
- Inputs Accept Voltages to 5.5 V
- Max tpd of 3.7 ns at 3.3 V
- Low Power Consumption, 10-µA Max ICC
- ±24-mA Output Drive at 3.3 V
- Ioff Supports Partial-Power-Down Mode Operation
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 222000-V Human-Body Model (A114-A)200-V Machine Model (A115-A)1000-V Charged-Device Model (C101)
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
产品概述
This bus buffer gate is designed for 1.65-V to 5.5-V VCC operation.The SN74LVC1G125 is a single line driver with a 3-state output. The output is disabled when the output-enable (OE) input is high.This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
CLVC1G125MDCKREP