CAUC1G125MDCKREP 供应商
-
CAUC1G125MDCKREP
品牌：TI 封装/批号：原厂原装/22+ -
CAUC1G125MDCKREP
品牌：TI(德州仪器) 封装/批号：SC-70-5/2022+
CAUC1G125MDCKREP 属性参数
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：逻辑 - 缓冲器，驱动器，接收器，收发器
- 系列：74AUC
- 逻辑类型：缓冲器/线路驱动器，非反相
- 元件数：1
- 每个元件的位元数：1
- 输出电流高，低：9mA，9mA
- 电源电压：0.8 V ~ 2.7 V
- 工作温度：-55°C ~ 125°C
- 安装类型：表面贴装
- 封装/外壳：6-TSSOP（5 引线），SC-88A，SOT-353
- 供应商设备封装：SC-70-5
- 包装：®
- 其它名称：296-22096-6
产品特性
- Controlled BaselineOne Assembly SiteOne Test SiteOne Fabrication Site
- One Assembly Site
- One Test Site
- One Fabrication Site
- Extended Temperature Performance of -55°C to 125°C
- Enhanced Diminishing Manufacturing Sources (DMS) Support
- Enhanced Product-Change Notification
- Qualification Pedigree(1)
- Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
- Ioff Supports Partial-Power-Down Mode Operation
- Sub-1-V Operable
- Max tpd of 2.5 ns at 1.8 V
- Low Power Consumption, 10-µA Max ICC
- ±8-mA Output Drive at 1.8 V
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 222000-V Human-Body Model (A114-A)200-V Machine Model (A115-A)1000-V Charged-Device Model (C101)
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
产品概述
The SN74AUC1G125 is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC operation.The SN74AUC1G125 is a single-line driver with a 3-state output. The output is disabled when the output-enable (OE) input is high.To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
CAUC1G125MDCKREP