UCC21540DWK 供应商
-
UCC21540DWK
品牌：TI 封装/批号：原厂原装/22+ -
UCC21540DWKR
品牌：TI(德州仪器) 封装/批号：SOIC-14/2022+
UCC21540DWK 属性参数
- 现有数量：0现货5,160Factory查看交期
- 价格：360 : ￥12.14744管件
- 系列：-
- 包装：管件
- 产品状态：在售
- 技术：容性耦合
- 通道数：2
- 电压 - 隔离：5700Vrms
- 共模瞬变抗扰度（最小值）：100V/ns
- 传播延迟 tpLH / tpHL（最大值）：40ns，40ns
- 脉宽失真（最大）：5.5ns
- 上升/下降时间（典型值）：5ns，6ns
- 电流 - 输出高、低：4A，6A
- 电流 - 峰值输出：4A，6A
- 电压 - 正向 (Vf)（典型值）：-
- 电流 - DC 正向 (If)（最大值）：-
- 电压 -?输出供电：9.2V ~ 18V
- 工作温度：-40°C ~ 125°C
- 安装类型：表面贴装型
- 封装/外壳：14-SOIC（0.295"，7.50mm 宽）
- 供应商器件封装：14-SOIC
- 认证机构：CQC，UL，VDE
产品特性
- Wide body package options DW SOIC-16: pin-2-pin to UCC21520 DWK SOIC-14: 3.3 mm Ch-2-Ch spacing
- DW SOIC-16: pin-2-pin to UCC21520
- DWK SOIC-14: 3.3 mm Ch-2-Ch spacing
- Up to 4-A peak source and 6-A peak sink output
- Up to 18-V VDD output drive supply 5-V and 8-V VDD UVLO Options
- 5-V and 8-V VDD UVLO Options
- CMTI greater than 100 V/ns
- Switching parameters: 40-ns maximum propagation delay 5-ns maximum delay matching 5.5-ns maximum pulse-width distortion 35-µs maximum VDD power-up delay
- 40-ns maximum propagation delay
- 5-ns maximum delay matching
- 5.5-ns maximum pulse-width distortion
- 35-µs maximum VDD power-up delay
- Resistor-programmable dead time
- TTL and CMOS compatible inputs
- Safety-related certifications: 8000-VPK reinforced isolation per DIN V VDE V 0884-11:2017-01 5700-VRMS isolation for 1 minute per UL 1577 CQC certification per GB4943.1-2011
- 8000-VPK reinforced isolation per DIN V VDE V 0884-11:2017-01
- 5700-VRMS isolation for 1 minute per UL 1577
- CQC certification per GB4943.1-2011
产品概述
The UCC2154x is an
isolated dual channel gate driver family designed with up to 4-A/6-A peak
source/sink current to drive power MOSFET, IGBT, and GaN transistors. UCC2154x in
DWK package also offers 3.3-mm minimum channel-to-channel spacing which facilitates
higher bus voltage.The UCC2154xfamily can be configured as two low-side drivers, two high-side drivers, or a half-bridge driver. The input side is isolated from the two output drivers by a 5.7-kVRMS isolation barrier, with a minimum of 100-V/ns common-mode transient immunity (CMTI).Protection features include: resistor programmable dead time, disable feature to shut down both outputs simultaneously, integrated de-glitch filter that rejects input transients shorter than 5ns, and negative voltage handling for up to –2V spikes for 200ns on input and output pins. All supplies have UVLO protection.