TS3USB221AQRSERQ1 供应商
-
TS3USB221AQRSERQ1 原装现货
品牌:TI 封装/批号:QFN-10/22+ -
TS3USB221AQRSERQ1
品牌:TI 封装/批号:NA/2022+ -
TS3USB221AQRSERQ1
品牌:TI 封装/批号:原厂原装/22+ -
TS3USB221AQRSERQ1
品牌:TI/德州仪器 封装/批号:UQFN10/24+ -
TS3USB221AQRSERQ1
品牌:TI/德州仪器 封装/批号:3000/21+ -
TS3USB221AQRSERQ1
品牌:TI(德州仪器) 封装/批号:UQFN-10/2022+
TS3USB221AQRSERQ1 属性参数
- 标准包装:1
- 类别:集成电路 (IC)
- 家庭:接口 - 模拟开关,多路复用器,多路分解器
- 系列:-
- 功能:USB 开关
- 电路:1 x 1:2
- 导通状态电阻:6 欧姆
- 电压电源:单电源
- 电压 - 电源,单路/双路(±):2.3 V ~ 3.6 V
- 电流 - 电源:30µA
- 工作温度:-40°C ~ 125°C
- 安装类型:表面贴装
- 封装/外壳:10-UFQFN
- 供应商设备封装:10-UQFN(2.0x1.5)
- 包装:®
- 其它名称:296-27719-6
产品特性
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature RangeDevice HBM ESD Classification Level H2 Device CDM ESD Classification Level C5
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C5
- VCC Operation at 2.5 V to 3.3 V
- VI/O Accepts Signals Up to 5.5 V
- 1.8-V Compatible Control-Pin Inputs
- Low-Power Mode When OE Is Disabled (1 µA)
- rON = 16 Ω Maximum
- ΔrON = 0.2 Ω Typical
- Cio(on) = 6 pF Typical
- Low Power Consumption (30 µA Maximum)
- High Bandwidth (900 MHz Typical)
- ESD Performance Tested Per JESD 227000-V Human-Body Model (A114-B, Class II) 1000-V Charged-Device Model (C101)
- 7000-V Human-Body Model (A114-B, Class II)
- 1000-V Charged-Device Model (C101)
- ESD Performance I/O to GND Per JESD 2212-kV Human-Body Model
- 12-kV Human-Body Model
产品概述
The TS3USB221A-Q1 is a high-bandwidth switch specially designed for the switching of
high-speed USB 2.0 signals in
automotive USB hubs or controllers with limited USB I/Os. The wide bandwidth (900 MHz) of this
switch allows signals to pass with minimum edge and phase distortion. The device multiplexes
differential outputs from a USB host device to one of two corresponding outputs. The switch is
bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is
designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible
with various standards, such as high-speed USB 2.0 (480 Mbps). The TS3USB221A-Q1 integrates ESD protection cells on all pins, is available in a tiny
UQFN package
(2 mm × 1.5 mm) and is characterized over the free air temperature range from –40°C to
125°C.