TPS79733DCKT 供应商
- 
									
TPS79733DCKT
品牌:TI 封装/批号:原厂原装/22+ - 
									
TPS79733DCKT
品牌:TI/德州仪器 封装/批号:SOT353/2024 - 
									
TPS79733DCKT
品牌: 封装/批号:/2019+ - 
									
TPS79733DCKT
品牌:TI(德州仪器) 封装/批号:SC-70-5/2022+ - 
									
TPS79733DCKT
品牌:TI 封装/批号:原厂原封装/新批号 - 
									
TPS79733DCKT
品牌: 封装/批号:/23+ - 
									
TPS79733DCKTG4
品牌:TI 封装/批号:/21+ 
TPS79733DCKT 属性参数
- 标准包装:1
 - 类别:集成电路 (IC)
 - 家庭:PMIC - 稳压器 - 线性
 - 系列:-
 - 稳压器拓扑结构:正,固定式
 - 输出电压:3.3V
 - 输入电压:最高 5.5V
 - 电压 - 压降(标准):0.105V @ 10mA
 - 稳压器数量:1
 - 电流 - 输出:50mA(最小值)
 - 电流 - 限制(最小):-
 - 工作温度:-40°C ~ 85°C
 - 安装类型:表面贴装
 - 封装/外壳:6-TSSOP(5 引线),SC-88A,SOT-353
 - 供应商设备封装:SC-70-5
 - 包装:®
 - 其它名称:296-27112-6
 
产品特性
- 50-mA Low-Dropout Regulator
 - Ultra-Low 1.2-µA Quiescent Current at 10 mA
 - 5-Pin SC70 (DCK) Package
 - Integrated Power Good Output
 - Stable With Any Capacitor Greater Than 0.47 µF
 - Typical Dropout Voltage of 105 mV at 10 mA (TPS79733)
 - Over-Current Limitation
 - Operating Junction Temperature Range of –40°C to 85°C
 
产品概述
												The TPS797xx family of low-dropout voltage regulators (LDOs) offers the benefits of
 		low-dropout voltage and ultra-low-power operation. The device is stable with any capacitor greater
 		than 0.47-µF. Therefore, implementations of this device require very little board space due to the
 		miniaturized packaging and potentially small output capacitor. In addition, the family includes an
 		integrated open drain active-high power good (PG) output. Intended for use in
 		microcontroller-based, battery-powered applications, the TPS797xx family low dropout and
 		ultra-low-power operation result in a significant increase in system battery operating life. The
 		small packaging minimizes consumption of board space.The device is enabled when the applied voltage exceeds the minimum input voltage. The
 		usual PNP pass transistor has been replaced by a PMOS pass element. Because the PMOS pass element
 		behaves as a low-value resistor, the dropout voltage is very low (typically, 105 mV at 10-mA of
 		load current), and is directly proportional to the load current. The quiescent current is ultra-low
 		(1.2-µA, typically) and is stable over the entire range of output load current (0 mA to 50 mA). When properly configured with a pullup resistor, the PG output can implement a power-on reset or low-battery indicator.
											
											
										TPS79733DCKT 数据手册
TPS79733DCKT 电路图