TPS73118DBVR 供应商
-
TPS73118DBVR
品牌:TI 封装/批号:原厂原装/22+ -
TPS73118DBVR
品牌: 封装/批号:SOT23-5/2024 -
TPS73118DBVR
品牌:TI(德州仪器) 封装/批号:SOT-23-5/2022+ -
TPS73118DBVR
品牌:TI 封装/批号:SOT23/21+ -
TPS73118DBVR
品牌:TI 封装/批号:SOT/新批号 -
TPS73118DBVRG4
品牌:TI 封装/批号:SOT23-5/23+
TPS73118DBVR 属性参数
- 标准包装:1
- 类别:集成电路 (IC)
- 家庭:PMIC - 稳压器 - 线性
- 系列:-
- 稳压器拓扑结构:正,固定式
- 输出电压:1.8V
- 输入电压:最高 5.5V
- 电压 - 压降(标准):0.03V @ 150mA
- 稳压器数量:1
- 电流 - 输出:150mA(最小值)
- 电流 - 限制(最小):150mA
- 工作温度:-40°C ~ 125°C
- 安装类型:表面贴装
- 封装/外壳:SC-74A,SOT-753
- 供应商设备封装:SOT-23-5
- 包装:®
- 其它名称:296-27059-6
产品特性
- Stable With or Without Capacitors of All Types
- Input Voltage Range of 1.7 V to 5.5 V
- Ultralow Dropout Voltage: 30 mV Typical (150-mA Load)
- Excellent Load Transient Response–With or Without Optional Output Capacitor
- New NMOS Topology Provides Low Reverse Leakage Current
- Low Noise: 30 µVRMS Typical (10 kHz to 100 kHz)
- 0.5% Initial Accuracy
- 1% Overall Accuracy Over Line, Load, and Temperature
- Less Than 1-µA Maximum IQ in Shutdown Mode
- Thermal Shutdown and Specified Minimum and Maximum Current Limit Protection
- Available in Multiple Output Voltage Versions Fixed Outputs of 1.20 V to 5 V Adjustable Outputs from 1.2 V to 5.5 V Custom Outputs Available
- Fixed Outputs of 1.20 V to 5 V
- Adjustable Outputs from 1.2 V to 5.5 V
- Custom Outputs Available
- APPLICATIONS Smart Grid and Energy Building Automation Set-Top Boxes Medical Equipment Test and Measurement Point-of-Sale Terminals Wireless Infrastructure
- Smart Grid and Energy
- Building Automation
- Set-Top Boxes
- Medical Equipment
- Test and Measurement
- Point-of-Sale Terminals
- Wireless Infrastructure
产品概述
The TPS731xx family of low-dropout (LDO) linear voltage regulators uses a new topology:
an NMOS pass element in a voltage-follower configuration. This topology is stable using output
capacitors with low equivalent series resistance (ESR), and even allows operation without a
capacitor. The device also provides high reverse blockage (low reverse current) and ground pin
current that is nearly constant over all values of output current.The TPS731xx uses an advanced BiCMOS process to yield high precision while delivering
very low dropout voltages and low ground pin current. Current consumption, when not enabled, is
less than 1 µA and ideal for portable applications. The extremely low output noise (30
µVRMS with 0.1-µF CNR) is ideal for powering VCOs.
These devices are protected by thermal shutdown and foldback current limit.
TPS73118DBVR 数据手册
TPS73118DBVR 电路图