TPS65200YFFR 供应商
-
TPS65200YFFR
品牌：TI 封装/批号：原厂原装/22+ -
TPS65200YFFR
品牌：TI(德州仪器) 封装/批号：DSBGA-36/2022+ -
TPS65200YFFR
品牌：TI 封装/批号：原厂原装/2318+
TPS65200YFFR 属性参数
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：PMIC - 电池管理
- 系列：-
- 功能：充电管理
- 电池化学：锂离子（Li-Ion）、锂聚合物（Li-Pol）
- 电源电压：4 V ~ 6 V
- 工作温度：-40°C ~ 85°C
- 安装类型：表面贴装
- 封装/外壳：36-DSBGA
- 供应商设备封装：36-DSBGA
- 包装：®
- 其它名称：296-28043-6
产品特性
- Battery Switching Charger, WLED Driver, and Current Shunt Monitor in a Single Package
- Battery Charger Charges Faster Than Linear Chargers High-Accuracy Voltage and Current Regulation Input Current Regulation Accuracy: ±5% (100 mA, 500 mA) Charge Voltage Regulation Accuracy: ±0.5% (25°C) ±1% (0 - 125°C) Charge Current Regulation Accuracy: ±5% Bad Adaptor Detection and Rejection Safety Limit Register for Maximum Charge Voltage and Current Limiting High-Efficiency Mini-USB/AC Battery Charger for Single-Cell Li-Ion and Li-Polymer Battery Packs Built-In Input Current Sensing and Limiting Integrated Power FETs for Up to 1.25-A Charge Rate Programmable Charge Parameters through I2C Interface (Up to 400 Kbps): Input Current Fast-Charge/Termination Current Charge Voltage (3.5 V – 4.44 V) Safety Timer Termination Enable Synchronous Fixed-Frequency PWM Controller Operating at 3 MHz With 0% to 99.5% Duty Cycle Safety Timer With Reset Control Reverse Leakage Protection Prevents Battery Drainage Thermal Regulation and Protection Input/Output Overvoltage Protection Automatic Charging Boost Mode Operation for USB OTG Input Voltage Range (VSYS): 2.5 V to 4.5 V Output Voltage for VBUS: 5 V
- Charges Faster Than Linear Chargers
- High-Accuracy Voltage and Current Regulation Input Current Regulation Accuracy: ±5% (100 mA, 500 mA) Charge Voltage Regulation Accuracy: ±0.5% (25°C) ±1% (0 - 125°C) Charge Current Regulation Accuracy: ±5%
- Input Current Regulation Accuracy: ±5% (100 mA, 500 mA)
- Charge Voltage Regulation Accuracy: ±0.5% (25°C) ±1% (0 - 125°C)
- Charge Current Regulation Accuracy: ±5%
- Bad Adaptor Detection and Rejection
- Safety Limit Register for Maximum Charge Voltage and Current Limiting
- High-Efficiency Mini-USB/AC Battery Charger for Single-Cell Li-Ion and Li-Polymer Battery Packs
- Built-In Input Current Sensing and Limiting
- Integrated Power FETs for Up to 1.25-A Charge Rate
- Programmable Charge Parameters through I2C Interface (Up to 400 Kbps): Input Current Fast-Charge/Termination Current Charge Voltage (3.5 V – 4.44 V) Safety Timer Termination Enable
- Input Current
- Fast-Charge/Termination Current
- Charge Voltage (3.5 V – 4.44 V)
- Safety Timer
- Termination Enable
- Synchronous Fixed-Frequency PWM Controller Operating at 3 MHz With 0% to 99.5% Duty Cycle
- Safety Timer With Reset Control
- Reverse Leakage Protection Prevents Battery Drainage
- Thermal Regulation and Protection
- Input/Output Overvoltage Protection
- Automatic Charging
- Boost Mode Operation for USB OTG Input Voltage Range (VSYS): 2.5 V to 4.5 V Output Voltage for VBUS: 5 V
- Input Voltage Range (VSYS): 2.5 V to 4.5 V
- Output Voltage for VBUS: 5 V
- 35-V Open LED Protection for Up to 8 LEDs
- 200-mV Reference Voltage With ±2% Accuracy
- Built-In Soft Start for WLED Boost
- Up to 90% Efficiency
- Fixed Gain of 25 V/V
- Input Referred Offset Voltage Less Than ±40 µV Typical Enables Use of Shunt Resistors as Low as 20 mΩ
- Buffered Reference Voltage
- 36-Ball, 0.4-mm Pitch DSBGA Package
- Mobile Phones and Smart Phones
- MP3 Players
- Portable Navigation Devices
- Handheld Devices
产品概述
The TPS65200 device integrates a high-efficiency, USB-friendly switched-mode charger with
OTG support for single-cell Li-ion and Li-polymer batteries, D+D– detection, a 50-mA fixed-voltage
LDO, a high-efficiency WLED boost converter, and high-accuracy current-shunt monitor into a single
chip.The TPS65200 comes in a tiny, 2.8-mm × 2.6-mm, 36-pin, 0.4-mm pitch die size ball grid
array (DSBGA).