TPA6110A2DGNG4 供应商
-
TPA6110A2DGNG4
品牌：TI 封装/批号：原厂原装/22+ -
TPA6110A2DGNG4
品牌：TI 封装/批号：/21+
TPA6110A2DGNG4 属性参数
- 标准包装：80
- 类别：集成电路 (IC)
- 家庭：线性 - 音頻放大器
- 系列：-
- 类型：AB 类
- 输出类型：耳机，2-通道（立体声）
- 在某负载时最大输出功率 x 通道数量：150mW x 2 @ 16 欧姆
- 电源电压：2.5 V ~ 5.5 V
- 特点：消除爆音，短路保护和热保护，关闭
- 安装类型：表面贴装
- 供应商设备封装：8-MSOP-PowerPad
- 封装/外壳：8-TSSOP，8-MSOP（0.118"，3.00mm 宽）裸露焊盘
- 包装：管件
- 配用：296-10844-ND - EVAL MOD FOR TPA6110A2
产品特性
- 150 mW Stereo Output
- PC Power Supply Compatible Fully Specified for 3.3 V and 5 V Operation Operation to 2.5 V
- Fully Specified for 3.3 V and 5 V Operation
- Operation to 2.5 V
- Pop Reduction Circuitry
- Internal Mid-Rail Generation
- Thermal and Short-Circuit Protection
- Surface-Mount Packaging PowerPAD™ MSOP
- PowerPAD™ MSOP
- Pin Compatible With LM4881
产品概述
The TPA6110A2 is a stereo audio power amplifier packaged in an 8-pin PowerPAD™ MSOP package capable of delivering 150 mW of continuous RMS power per channel into 16-Ω loads. Amplifier gain is externally configured by means of two resistors per input channel and does not require external compensation for settings of 1 to 10.THD+N when driving a 16-Ω load from 5 V is 0.03% at 1 kHz, and less than 1% across the audio band of 20 Hz to 20 kHz. For 32-Ω loads, the THD+N is reduced to less than 0.02% at 1 kHz, and is less than 1% across the audio band of 20 Hz to 20 kHz. For 10-kΩ loads, the THD+N performance is 0.005% at 1 kHz, and less than 0.5% across the audio band of 20 Hz to 20 kHz.
TPA6110A2DGNG4 电路图
