TPA6102A2DGK 供应商
-
TPA6102A2DGK
品牌：TI 封装/批号：原厂原装/22+ -
TPA6102A2DGKR
品牌：TI(德州仪器) 封装/批号：VSSOP-8/2022+
TPA6102A2DGK 属性参数
- 标准包装：80
- 类别：集成电路 (IC)
- 家庭：线性 - 音頻放大器
- 系列：-
- 类型：AB 类
- 输出类型：耳机，2-通道（立体声）
- 在某负载时最大输出功率 x 通道数量：50mW x 2 @ 16 欧姆
- 电源电压：1.6 V ~ 3.6 V
- 特点：消除爆音，短路保护和热保护，关闭
- 安装类型：表面贴装
- 供应商设备封装：8-MSOP
- 封装/外壳：8-TSSOP，8-MSOP（0.118"，3.00mm 宽）
- 包装：管件
- 配用：296-11637-ND - EVAL MOD FOR TPA6102A2
产品特性
- 50-mW Stereo Output
- Low Supply Current...0.75 mA
- Low Shutdown Current...50 nA
- Minimal External Components Required
- Gain Set Internally to 14 dB
- Pop Reduction Circuitry
- Internal Mid-Rail Generation
- Thermal and Short-Circuit Protection
- Surface-Mount Packaging MSOP SOIC
- MSOP
- SOIC
- 1.6-V to 3.6-V Supply Voltage Range
产品概述
The TPA6102A2 is a stereo audio power amplifier packaged in either an 8-pin SOIC package or an 8-pin MOSP package capable of delivering 50 mW of continuous RMS power per channel into 16-
loads. Amplifier gain is internally set to 14 dB (inverting) to save board space by eliminating six external resistors.The TPA6102A2 is optimized for battery applications because of its low supply current, shutdown current, and THD+N. To obtain the low supply voltage range, the TPA6102A2 biases BYPASS to VDD/4.When driving a 16-
load with 40 mW output power from 3.3 V, THD+N is 0.08% at 1 kHz, and less than 0.2% across the audio band of 20 Hz to 20 kHz. For 30 mW into 32-
loads, the THD+N is reduced to less than 0.06% at 1 kHz, and is less than 0.3% across the audio band of 20 Hz to 20 kHz.
TPA6102A2DGK