TPA3007D1PWR 供应商
-
TPA3007D1PWR
品牌：TI 封装/批号：原厂原装/22+ -
TPA3007D1PWR
品牌：TI(德州仪器) 封装/批号：TSSOP-24/2022+
TPA3007D1PWR 属性参数
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：线性 - 音頻放大器
- 系列：-
- 类型：D 类
- 输出类型：1-通道（单声道）
- 在某负载时最大输出功率 x 通道数量：6.5W x 1 @ 8 欧姆
- 电源电压：8 V ~ 18 V
- 特点：消除爆音，差分输入，短路和热保护，关闭
- 安装类型：表面贴装
- 供应商设备封装：24-TSSOP
- 封装/外壳：24-TSSOP（0.173"，4.40mm 宽）
- 包装：®
- 其它名称：296-26880-6
产品特性
- 6.5 W Into 8- to VCC, Short to GND, Short Between Outputs)
- Third-Generation Modulation Technique: Replaces Large LC Filter With Small, Low-Cost Ferrite Bead Filter in Most Applications Improved Efficiency Improved SNR
- Replaces Large LC Filter With Small, Low-Cost Ferrite Bead Filter in Most Applications
- Improved Efficiency
- Improved SNR
- Low Supply Current... mA Typ at 12 V
- Shutdown Control... < 1µA Typ
- APPLICATIONS LCD Monitors/TVsDesktop Replacement Notebook PCsHands-Free Car KitsPowered Speakers
- LCD Monitors/TVs
- Desktop Replacement Notebook PCs
- Hands-Free Car Kits
- Powered Speakers
产品概述
The TPA3007D1 is a 6.5-W mono bridge-tied load (BTL) class-D
audio power amplifier with high efficiency, eliminating the need for heat
sinks. The TPA3007D1 can drive 8- speakers with only a ferrite bead
filter required to reduce EMI.The gain of the amplifier is controlled by two input terminals, GAIN1 and
GAIN0. This allows the amplifier to be configured for a gain of 12, 18, 23.6,
and 36 dB. The differential input stage provides high common mode rejection and
improved power supply rejection.The amplifier also includes "de-pop" circuitry to reduce the amount of pop
at power-up and when cycling SHUTDOWN.The TPA3007D1 is available in the 24-pin TSSOP package
(PW) and does not require an external heat sink.
TPA3007D1PWR