TLC5921DAPR 供应商
-
TLC5921DAPR
品牌：TI 封装/批号：原厂原装/22+ -
TLC5921DAPR
品牌：TI 封装/批号：HTSSOP-32/10+ -
TLC5921DAPR
品牌：TI/德州仪器 封装/批号：TSSOP32/21+ -
TLC5921DAPR
品牌： 封装/批号：/2019+ -
TLC5921DAPR
品牌：TI 封装/批号：TSSOP/23+
TLC5921DAPR 属性参数
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：PMIC - LED 驱动器
- 系列：-
- 恒定电流：是
- 恒定电压：-
- 拓扑：线性，高端
- 输出数：16
- 内部驱动器：是
- 类型 - 主要：LED 照明显示器，标牌，汽车
- 类型 - 次要：-
- 频率：20MHz
- 电源电压：4.5 V ~ 5.5 V
- 输出电压：17V
- 安装类型：表面贴装
- 封装/外壳：32-TSSOP（0.240"，6.10mm 宽）裸露焊盘
- 供应商设备封装：32-HTSSOP
- 包装：®
- 工作温度：-20°C ~ 85°C
- 其它名称：296-26760-6
产品特性
- Drive Capability and Output Counts 80 mA (Current Sink) x 16 Bits
- 80 mA (Current Sink) x 16 Bits
- Constant Current Output Range 1 to 80 mA ( Current Value Setting for All Output Terminals Using External Resistor)
- 1 to 80 mA ( Current Value Setting for All Output Terminals Using External Resistor)
- Constant Current Accuracy ±1% (Typ) ±4% (Max) (Maximum Error Between Bits, All Bits On)
- ±1% (Typ)
- ±4% (Max) (Maximum Error Between Bits, All Bits On)
- Voltage Applied to Constant Current Output Terminal Minimum 0.6 V (Output Current 40 mA) Minimum 1 V (Output Current 80 mA)
- Minimum 0.6 V (Output Current 40 mA)
- Minimum 1 V (Output Current 80 mA)
- Data Input Clock Synchronized 1 Bit Serial Input
- Clock Synchronized 1 Bit Serial Input
- Data Output Clock Synchronized 1 bit Serial Output (With Timing Selection)
- Clock Synchronized 1 bit Serial Output (With Timing Selection)
- Input/Output Signal Level...CMOS Level
- Power Supply Voltage...4.5 V to 5.5V
- Maximum Output Voltage...17 V (Max)
- Data Transfer Rate...20 MHz (Max)
- Operating Free-Air Temperature Range -20°C to 85°C
- Available in 32 Pin HTSSOP DAP Package (PD=3.9 W, TA = 25°C)
- LOD Function...LED Open Detection (Error Signal Output at LED Disconnection)
- TSD Function...Thermal Shutdown (Turn Output Off When Junction Temperature Exceeds Limit)
产品概述
The TLC5921 is a current-sink constant current driver incorporating shift register and data latch. The current value at constant current output can be set by one external register. The device also incorporates thermal shutdown (TSD) circuitry which turns constant current output off when the junction temperature exceeds the limit, and LED open detection (LOD) circuitry to report the LED was disconnected.