TLC3545IDR 供应商
-
TLC3545IDR
品牌:TI 封装/批号:原厂原装/22+ -
TLC3545IDR
品牌:TI(德州仪器) 封装/批号:SOIC-8/2022+
TLC3545IDR 属性参数
- 产品培训模块:Data Converter Basics
- 标准包装:2,500
- 类别:集成电路 (IC)
- 家庭:数据采集 - 模数转换器
- 系列:-
- 位数:14
- 采样率(每秒):200k
- 数据接口:DSP,串行,SPI?
- 转换器数目:1
- 功率耗散(最大):17.5mW
- 电压电源:单电源
- 工作温度:-40°C ~ 85°C
- 安装类型:表面贴装
- 封装/外壳:8-SOIC(0.154",3.90mm 宽)
- 供应商设备封装:8-SOIC
- 包装:带卷 (TR)
- 输入数目和类型:2 个单端,单极;1 个伪差分,单极
- 配用:296-20575-ND - EVAL MOD FOR TLC3545296-18350-ND - KIT 5-6K INTERFACE BOARD
产品特性
- 200-KSPS Sampling Rate
- Built-In Conversion Clock
- INL: ±1 LSB Max DNL: ±1 LSB Max
- SINAD = 81.5 dB, SFDR = 95 dB THD = 94 dB at 15 kHz fin, 200 KSPS
- SPI/DSP-Compatible Serial Interfaces With SCLK Input up to 15 MHz
- Single 5-V Supply
- Rail-to-Rail Analog Input With 500 kHz BW
- Two Input Options Available: TLC3541 Single Channel Input TLC3545 Single Channel, Pseudo-Differential Input
- TLC3541 Single Channel Input
- TLC3545 Single Channel, Pseudo-Differential Input
- (TLC3541) Optimized DSP Interface Requires FS Input Only
- Low Power With Auto-Power Down Operating Current: 3.5 mA Auto-Powerdown Current: 5 uA
- Operating Current: 3.5 mA
- Auto-Powerdown Current: 5 uA
- Pin Compatible 12-/14-/16-Bit Family in 8-Pin SOIC and MSOP Packages
- APPLICATIONS ATE System Industrial Process Control Measurement Motor Control
- ATE System
- Industrial Process Control
- Measurement
- Motor Control
产品概述
The TLC3541 and TLC3545 are a family of high
performance, 14-bit, low power, miniature CMOS
analog-to-digital converters (ADCs). These devices
operate from a single 5-V supply. Devices are available
with single, dual, or single pseudo-differential inputs. All
of these devices have a chip select (CS)\, serial clock
(SCLK), and serial data output (SDO) that provides a
direct 3-wire interface to the serial port of most popular
host microprocessors (SPI interface). When interfaced
with a DSP, a frame sync signal (FS) is used to indicate
the start of a serial data frame on either pin 1 (CS)\ or pin
7 (FS) for the TLC3541. The TLC3545 ADC connects
to the DSP via pin 1 only (CS)\.The TLC3541 and TLC3545 are designed to operate
with low power consumption. The power saving feature
is further enhanced with an auto-power down mode.
This product family features a high-speed serial link to
modern host processors with an external SCLK up to
15 MHz. Both families use a built-in oscillator as the
conversion clock, providing a 2.67 us maximum
conversion time.
TLC3545IDR 数据手册
TLC3545IDR 电路图