TL751M12QKVURQ1 供应商
-
TL751M12QKVURQ1
品牌：TI 封装/批号：原厂原装/22+ -
TL751M12QKVURQ1
品牌：TI(德州仪器) 封装/批号：TO-252-5/2022+
TL751M12QKVURQ1 属性参数
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：PMIC - 稳压器 - 线性
- 系列：-
- 稳压器拓扑结构：正，固定式
- 输出电压：12V
- 输入电压：13 V ~ 26 V
- 电压 - 压降（标准）：-
- 稳压器数量：1
- 电流 - 输出：750mA（最小值）
- 电流 - 限制（最小）：-
- 工作温度：-40°C ~ 125°C
- 安装类型：表面贴装
- 封装/外壳：TO-252-5，DPak（4 引线 + 接片），TO-252AD
- 供应商设备封装：5-PFM
- 包装：®
- 其它名称：296-27430-6
产品特性
- Qualified for Automotive Applications
- Low Dropout Voltage, Less Than 0.6 V at 750 mA
- Low Quiescent Current
- TTL- and CMOS-Compatible Enable on TL751M Series
- Load-Dump Protection
- Overvoltage Protection
- Internal Thermal Overload Protection
- Internal Overcurrent-Limiting Circuitry
产品概述
The TL750M and TL751M series are low-dropout positive voltage regulators specifically designed for automotive applications. The TL750M and TL751M series incorporate onboard overvoltage and current-limiting protection circuitry to protect the devices and the regulated system. Both series are fully protected against load-dump and reverse-battery conditions. Load-dump protection is up to a maximum of 60 V at the input of the device. Low quiescent current, even during full-load conditions, makes the TL750M and TL751M series ideal for use in applications that are permanently connected to the vehicle battery.The TL750M and TL751M series offers 5-V, 8-V, and 12-V options. The TL751M series has the addition of an enable (ENABLE) input. The ENABLE input gives complete control over power up, allowing sequential power up or shutdown. When ENABLE is high, the regulator output is placed in the high-impedance state. The ENABLE input is TTL and CMOS compatible.The TL750Mxx and TL751Mxx are characterized for operation over the virtual junction temperature range –40°C to 125°C.