TB5T1D 供应商
TB5T1D 属性参数
- 标准包装：40
- 类别：集成电路 (IC)
- 家庭：接口 - 驱动器，接收器，收发器
- 系列：-
- 类型：收发器
- 驱动器/接收器数：2/2
- 规程：-
- 电源电压：4.5 V ~ 5.5 V
- 安装类型：表面贴装
- 封装/外壳：16-SOIC（0.154"，3.90mm 宽）
- 供应商设备封装：16-SOIC N
- 包装：管件
- 其它名称：296-16689-5
产品特性
- Functional Replacement for the Agere BTF1A
- Driver Features Third-State Logic Low Output ESD Protection HBM > 3 kV, CDM > 2 kV No Line Loading when VCC = 0 Capable of Driving 50- loads 2.0-ns Maximum Propagation Delay 0.2-ns Output Skew (typical)
- Third-State Logic Low Output
- ESD Protection HBM > 3 kV, CDM > 2 kV
- No Line Loading when VCC = 0
- Capable of Driving 50- loads
- 2.0-ns Maximum Propagation Delay
- 0.2-ns Output Skew (typical)
- Receiver Features High-Input Impedance Approximately 8 k 4.0-ns Maximum Propagation Delay 50-mV Hysteresis Slew Rate Limited (1 ns min 80% to 20%) ESD Protection HBM > 3 kV, CDM > 2 kV -1.1-V to 7.1-V Input Voltage Range
- High-Input Impedance Approximately 8 k
- 4.0-ns Maximum Propagation Delay
- 50-mV Hysteresis
- Slew Rate Limited (1 ns min 80% to 20%)
- ESD Protection HBM > 3 kV, CDM > 2 kV
- -1.1-V to 7.1-V Input Voltage Range
- Common Device Features Common Enable for Each Driver/Receiver Pair Operating Temperature Range: -40°C to 85°C Single 5.0 V ± 10% Supply Available in Gull-Wing SOIC (JEDEC MS-013, DW) and SOIC (D) Package
- Common Enable for Each Driver/Receiver Pair
- Operating Temperature Range: -40°C to 85°C
- Single 5.0 V ± 10% Supply
- Available in Gull-Wing SOIC (JEDEC MS-013, DW) and SOIC (D) Package
产品概述
The TB5T1 device is a dual differential driver/receiver circuit that transmits and receives digital data over balanced transmission lines. The dual drivers translate input TTL logic levels to differential pseudo-ECL output levels. The dual receivers convert differential-input logic levels to TTL output levels. Each driver or receiver pair has its own common enable control allowing serial data and a control clock to be transmitted and received on a single integrated circuit. The TB5T1 requires the customer to supply termination resistors on the circuit board.The power-down loading characteristics of the receiver input circuit are approximately 8 k relative to the power supplies; hence, it does not load the transmission line when the circuit is powered down. In circuits with termination resistors, the line remains impedance- matched when the circuit is powered down. The driver does not load the line when it is powered down.All devices are characterized for operation from -40°C to 85°C.The logic inputs of this device include internal pull-up resistors of approximately 40 k that are connected to VCC to ensure a logical high level input if the inputs are open circuited.
TB5T1D