TAS5701PAPR 供应商
-
TAS5701PAPR
品牌：TI 封装/批号：原厂原装/22+
TAS5701PAPR 属性参数
- 视频文件：TAS57xx Graphical Development Environment
- 标准包装：1,000
- 类别：集成电路 (IC)
- 家庭：线性 - 音頻放大器
- 系列：-
- 类型：D 类
- 输出类型：2 通道（立体声）
- 在某负载时最大输出功率 x 通道数量：20W x 2 @ 8 欧姆
- 电源电压：10.8 V ~ 13.2 V
- 特点：消除爆音，数字输入，I²S，静音，PWM，短路和热保护，关机，音量控制
- 安装类型：表面贴装
- 供应商设备封装：64-HTQFP（10x10）
- 封装/外壳：64-TQFP 裸露焊盘
- 包装：带卷 (TR)
产品特性
- Audio Input/Output 20-W Into an 8- Load From an 18-V Supply Wide PVDD Range (0 V to 21 V) Efficient Class-D Operation Eliminates Need for Heat Sinks Two Serial Audio Inputs (3 Audio channels) Supports 32-kHz to 192-kHz Sample Rates (LJ/RJ/I2S) Line-Level Subwoofer PWM Outputs
- 20-W Into an 8- Load From an 18-V Supply
- Wide PVDD Range (0 V to 21 V)
- Efficient Class-D Operation Eliminates Need for Heat Sinks
- Two Serial Audio Inputs (3 Audio channels)
- Supports 32-kHz to 192-kHz Sample Rates (LJ/RJ/I2S)
- Line-Level Subwoofer PWM Outputs
- Audio/PWM Processing BD (Filter-free) Modulation Supporting Bridge-Tied Loads ONLY 4-Step Volume Control (0 dB, 6 dB, 12 dB, 18 dB) – All Channels Share Same Control Soft Mute (50% Duty Cycle) DC Blocking Filters Fixed Maximum Modulation Limit At 97.7% ≥100-dB SNR – Measured at Maximum Output With THD+N = 1%, 1 kHz, A-Weighted Noise, Gain = 0 dB THD < 0.1% at 1/2 Rated Power
- BD (Filter-free) Modulation Supporting Bridge-Tied Loads ONLY
- 4-Step Volume Control (0 dB, 6 dB, 12 dB, 18 dB) – All Channels Share Same Control
- Soft Mute (50% Duty Cycle)
- DC Blocking Filters
- Fixed Maximum Modulation Limit At 97.7%
- ≥100-dB SNR – Measured at Maximum Output With THD+N = 1%, 1 kHz, A-Weighted Noise, Gain = 0 dB
- THD < 0.1% at 1/2 Rated Power
- General Features 5-V Tolerant Inputs (See pin list for details on which inputs are 5-V tolerant) Shutdown Mode for Low Power Consumption Thermal and Short-Circuit Protection Autodetect: Automatically Detect Sample-Rate Changes – No Need for External Microprocessor Intervention
- 5-V Tolerant Inputs (See pin list for details on which inputs are 5-V tolerant)
- Shutdown Mode for Low Power Consumption
- Thermal and Short-Circuit Protection
- Autodetect: Automatically Detect Sample-Rate Changes – No Need for External Microprocessor Intervention
产品概述
The TAS5701 is a 20-W efficient, digital audio power amplifier for driving stereo bridge-tied speakers. Two serial data inputs support up to 3 discrete audio channels. The SDIN1 input is routed to the internal left and right outputs. The SDIN2 input is dedicated to the SUB_PWM± outputs.The TAS5701 is a clock slave-only device receiving clocks from external sources. The TAS5701 operates at a 384-kHz switching rate for 32-, 48-, 96-, and 192-kHz data and 352.8-kHz switching rate 44.1-,88.2-, and 176.4-kHz data. The 8× oversampling combined with the fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.