TAS5601DCAR 供应商
-
TAS5601DCAR
品牌:TI 封装/批号:原厂原装/22+
TAS5601DCAR 属性参数
- 标准包装:1
- 类别:集成电路 (IC)
- 家庭:线性 - 音頻放大器
- 系列:-
- 类型:D 类
- 输出类型:2-通道(立体声)或 4 通道(四路)
- 在某负载时最大输出功率 x 通道数量:20W x 2 @ 8 欧姆; 19W x 4 @ 4 欧姆
- 电源电压:10 V ~ 26 V
- 特点:数字 PWM 输入,短路和热保护
- 安装类型:表面贴装
- 供应商设备封装:56-HTSSOP
- 封装/外壳:56-TFSOP(0.240",6.10mm 宽)裸露焊盘
- 包装:®
- 配用:TAS5601EVM4-ND - TAS5601EVM4
- 其它名称:296-23099-6
产品特性
- Supports Multiple Output Configurations2×20-W into a 8-Ω BTL Load at 18 V 4×10-W into a 4-Ω SE Load at 18 V 2×10W (SE) + 1×20W (BTL) at 18 V
- 2×20-W into a 8-Ω BTL Load at 18 V
- 4×10-W into a 4-Ω SE Load at 18 V
- 2×10W (SE) + 1×20W (BTL) at 18 V
- Thermally Enhanced PackageDCA (56-pin HTTSOP)
- DCA (56-pin HTTSOP)
- Wide Voltage Range: 10V26VNo Separate Supply Required for Gate Drive
- No Separate Supply Required for Gate Drive
- Efficient Class-D Operation Eliminates Need for Heat Sinks
- Closed Loop Power Stage ArchitectureImproved PSRR Reduces Power Supply Performance RequirementsHigh Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass ResponseConstant Output Power Over Variation in Supply Voltage
- Improved PSRR Reduces Power Supply Performance Requirements
- High Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass Response
- Constant Output Power Over Variation in Supply Voltage
- Differential Inputs
- Integrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, and Short Circuit With Error Reporting
- APPLICATIONSFlat-Panel, Rear-Projection, and CRT TV
- Flat-Panel, Rear-Projection, and CRT TV
产品概述
The TAS5601 is a 20-W (per channel) efficient, stereo digital amplifier power stage for driving 4 single-ended speakers, 2 bridge-tied speakers, or combination of single and bridge-tied loads. The TAS5601 can drive a speaker with an impedance as low as 4Ω. The high efficiency, >90% into 8-Ω loads, of the TAS5601 eliminates the need for an external heat sink.A simple interface to a digital audio PWM processor is shown below. The TAS5601 is fully protected against faults with short-circuit protection and thermal protection as well as overvoltage and undervoltage protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.