SN75ALS160N 供应商
-
SN75ALS160N
品牌：TI 封装/批号：原厂原装/22+ -
SN75ALS160N
品牌： 封装/批号：DIP/2019+ -
SN75ALS160N
品牌：TI(德州仪器) 封装/批号：PDIP-20/2022+
SN75ALS160N 属性参数
- 标准包装：20
- 类别：集成电路 (IC)
- 家庭：接口 - 驱动器，接收器，收发器
- 系列：-
- 类型：收发器
- 驱动器/接收器数：8/8
- 规程：IEEE 488
- 电源电压：4.75 V ~ 5.25 V
- 安装类型：通孔
- 封装/外壳：20-DIP（0.300"，7.62mm）
- 供应商设备封装：20-PDIP
- 包装：管件
- 其它名称：296-34134-5SN75ALS160N-ND
产品特性
- Suitable for IEEE Standard 488-1978 (GPIB)
- 8-Channel Bidirectional Transceivers
- High-Speed Advanced Low-Power Schottky (ALS) Circuitry
- Low Power Dissipation . . . 46 mW Max Per Channel
- Fast Propagation Times . . . 20 ns Max
- High-Impedance pnp Inputs
- Receiver Hysteresis . . . 650 mV Typ
- Open-Collector Driver Output Option
- No Loading of Bus When Device Is Powered Down (VCC = 0)
- Power-Up/Power-Down Protection (Glitch Free)
产品概述
The SN75ALS160 eight-channel general-purpose interface bus transceivers are monolithic, high-speed,
advanced low-power Schottky (ALS) devices designed for two-way data communications over single-ended
transmission lines. This device is designed to meet the requirements of IEEE Standard 488-1978. The
transceivers feature driver outputs that can be operated in either the passive-pullup or 3-state mode. If talk
enable (TE) is high, these ports have the characteristics of passive-pullup outputs when pullup enable (PE) is
low and of 3-state outputs when PE is high. Taking TE low places these ports in the high-impedance state. The
driver outputs are designed to handle loads up to 48 mA of sink current.An active turn-off feature has been incorporated into the bus-terminating resistors so that the device exhibits
a high impedance to the bus when VCC = 0. When combined with the SN75ALS161 or SN75ALS162 bus
management transceiver, the pair provides the complete 16-wire interface for the IEEE-488 bus.The SN75ALS160 is characterized for operation from 0°C to 70°C.
SN75ALS160N