SN74HCT540N 供应商
-
SN74HCT540N
品牌：TI 封装/批号：原厂原装/22+ -
SN74HCT540N
品牌：TI 封装/批号：TSSOP/23+
SN74HCT540N 属性参数
- 标准包装：20
- 类别：集成电路 (IC)
- 家庭：逻辑 - 栅极和逆变器
- 系列：74HCT
- 逻辑类型：逆变器，缓冲器
- 电路数：1
- 输入数：8
- 特点：三态
- 电源电压：4.5 V ~ 5.5 V
- 电流 - 静态（最大值）：8µA
- 输出电流高，低：6mA，6mA
- 逻辑电平 - 低：0.8V
- 逻辑电平 - 高：2V
- 额定电压和最大 CL 时的最大传播延迟：27ns @ 5.5V，150pF
- 工作温度：-40°C ~ 85°C
- 安装类型：通孔
- 供应商设备封装：20-PDIP
- 封装/外壳：20-DIP（0.300"，7.62mm）
- 包装：管件
- 其它名称：296-8419-5
产品特性
- Operating Voltage Range of 4.5 V to 5.5 V
- Low Power Consumption, 80-µA Max ICC
- Typical tpd = 12 ns
- ±6-mA Output Drive at 5 V
- Low Input Current of 1 µA Max
- Inputs Are TTL-Voltage Compatible
- High-Current 3-State Outputs Interface Directly With System Bus or Can Drive Up To 15 LSTTL Loads
- Data Flow-Through Pinout (All Inputs on Opposite Side From Outputs)
产品概述
These octal buffers and line drivers are designed to have the performance of the ’HCT240 devices and a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed circuit board layout.The 3-state control gate is a 2-input NOR. If either output-enable (OE1\ or OE2\) input is high, all eight outputs are in the high-impedance state. The ’HCT540 devices provide inverted data at the outputs.To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
SN74HCT540N