SN74AUC16240DGVR 供应商
-
SN74AUC16240DGVR
品牌:TI 封装/批号:原厂原装/22+ -
SN74AUC16240DGVR
品牌:TI(德州仪器) 封装/批号:TVSOP-48/2022+
SN74AUC16240DGVR 属性参数
- 标准包装:1
- 类别:集成电路 (IC)
- 家庭:逻辑 - 栅极和逆变器
- 系列:74AUC
- 逻辑类型:逆变器,缓冲器
- 电路数:4
- 输入数:4
- 特点:三态
- 电源电压:0.8 V ~ 2.7 V
- 电流 - 静态(最大值):20µA
- 输出电流高,低:9mA,9mA
- 逻辑电平 - 低:0 V ~ 0.7 V
- 逻辑电平 - 高:1.7V
- 额定电压和最大 CL 时的最大传播延迟:1.6ns @ 2.5V,30pF
- 工作温度:-40°C ~ 85°C
- 安装类型:表面贴装
- 供应商设备封装:48-TVSOP
- 封装/外壳:48-TFSOP(0.173",4.40mm 宽)
- 包装:®
- 其它名称:296-15409-6
产品特性
- Member of the Texas Instruments Widebus Family
- Optimized for 1.8-V Operation and is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
- Ioff Supports Partial-Power-Down Mode Operation
- Sub 1-V Operable
- Max tpd of 2 ns at 1.8 V
- Low Power Consumption, 20-uA Max ICC
- ±8-mA Output Drive at 1.8 V
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22 2000-V Human-Body Model (A114-A) 200-V Machine Model (A115-A) 1000-V Charged-Device Model (C101)
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
产品概述
This 16-bit buffer/driver is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC operation.The SN74AUC16240 is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides inverting outputs and symmetrical active-low output-enable (OE)\ inputs.To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.