SN74ABT16240ADLR 供应商
-
SN74ABT16240ADLR
品牌：TI 封装/批号：原厂原装/22+ -
SN74ABT16240ADLR
品牌：TI 封装/批号：/2019+
SN74ABT16240ADLR 属性参数
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：逻辑 - 栅极和逆变器
- 系列：74ABT
- 逻辑类型：逆变器，缓冲器
- 电路数：4
- 输入数：4
- 特点：三态
- 电源电压：4.5 V ~ 5.5 V
- 电流 - 静态（最大值）：34mA
- 输出电流高，低：32mA，64mA
- 逻辑电平 - 低：0.8V
- 逻辑电平 - 高：2V
- 额定电压和最大 CL 时的最大传播延迟：4.3ns @ 5V，50pF
- 工作温度：-40°C ~ 85°C
- 安装类型：表面贴装
- 供应商设备封装：48-SSOP
- 封装/外壳：48-BSSOP（0.295"，7.50mm 宽）
- 包装：®
- 其它名称：296-3884-6
产品特性
- Members of the Texas Instruments WidebusTM Family
- State-of-the-Art EPIC-II BTM BiCMOS Design Significantly Reduces Power Dissipation
- Typical VOLP (Output Ground Bounce) < 1 V at VCC = 5 V, TA = 25°C
- Distributed VCC and GND Pin Configuration Minimizes High-Speed Switching Noise
- Flow-Through Architecture Optimizes PCB Layout
- High-Drive Outputs (-32-mA IOH, 64-mA IOL)
- Latch-Up Performance Exceeds 500 mA Per JESD 17
- ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
- Package Options Include Plastic Shrink Small-Outline (DL), Thin Shrink Small-Outline (DGG), and Thin Very Small-Outline (DGV) Packages and 380-mil Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center Spacings
产品概述
The 'ABT16240A devices are 16-bit buffers and line drivers designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.
These devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. These devices provide inverting outputs and symmetrical active-low output-enable (OE\) inputs.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN54ABT16240A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT16240A is characterized for operation from -40°C to 85°C.
SN74ABT16240ADLR