SN65LVDS1050PWR 供应商
-
SN65LVDS1050PWR
品牌：TI 封装/批号：原厂原装/22+
SN65LVDS1050PWR 属性参数
- 标准包装：2,000
- 类别：集成电路 (IC)
- 家庭：接口 - 驱动器，接收器，收发器
- 系列：65LVDS
- 类型：线路收发器
- 驱动器/接收器数：2/2
- 规程：LVDS
- 电源电压：2.4 V ~ 3.6 V
- 安装类型：表面贴装
- 封装/外壳：16-TSSOP（0.173"，4.40mm 宽）
- 供应商设备封装：16-TSSOP
- 包装：带卷 (TR)
产品特性
- Typically Meets or Exceeds ANSI TIA/EIA-644-1995 Standard
- Operates From a Single 2.4-V to 3.6-V Supply
- Signaling Rates up to 400 Mbit/s
- Bus-Terminal ESD Exceeds 12 kV
- Low-Voltage Differential Signaling With Typical Output Voltages of 285 mV and a 100 Load
- Propagation Delay Times Driver: 1.7 ns Typ Receiver: 3.7 ns Typ Driver: 25-mW Typical Receiver: 60-mW Typical
- Driver: 1.7 ns Typ
- Receiver: 3.7 ns Typ
- Driver: 25-mW Typical
- Receiver: 60-mW Typical
- Power Dissipation at 200 MHz Driver: 25 mW Typical Receiver: 60 mW Typical
- Driver: 25 mW Typical
- Receiver: 60 mW Typical
- LVTTL Input Levels Are 5 V Tolerant
- Receiver Maintains High Input Impedance
- Receiver Has Open-Circuit Fail Safe
- Available in Thin Shink Outline Packaging With 20-mil Lead Pitch
产品概述
The SN65LVDS1050 is similar to the SN65LVDS050 except that it is characterized for operation with a lower supply voltage range and packaged in the thin shrink outline package for portable battery-powered applications.The differential line drivers and receivers use low-voltage differential signaling (LVDS) to achieve signaling rates as high as 400 Mbps. The drivers provide a minimum differential output voltage magnitude of 247 mV into a 100- load and receipt of 100-mV signals with up to 1 V of ground potential difference between a transmitter and receiver.The intended application of this device and signaling technique is for point-to-point baseband data transmission over controlled impedance media of approximately 100- characteristic impedance. The transmission media may be printed-circuit board traces, backplanes, or cables. Note: The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling to the environment and other application-specific characteristics.The SN65LVDS1050 is characterized for operation from –40°C to 85°C.
SN65LVDS1050PWR