SN65HVD61DR 供应商
-
SN65HVD61DR
品牌：TI 封装/批号：原厂原装/22+ -
SN65HVD61DR
品牌：TI(德州仪器) 封装/批号：SOIC-14/2022+
SN65HVD61DR 属性参数
- 标准包装：2,500
- 类别：集成电路 (IC)
- 家庭：接口 - 驱动器，接收器，收发器
- 系列：-
- 类型：收发器
- 驱动器/接收器数：1/1
- 规程：-
- 电源电压：4.75 V ~ 5.25 V
- 安装类型：表面贴装
- 封装/外壳：14-SOIC（0.154"，3.90mm 宽）
- 供应商设备封装：14-SOIC
- 包装：带卷 (TR)
产品特性
- Compatible With the ControlNet Standard
- I/O Operates From 2.5-V to 5-V Supply
- Receiver thresholds within –120mV to 120mV
- Receiver hysteresis >50mV
- Low Power Standby Mode
- Thermal Shutdown Protection
- Power-Up/Down Glitch-free Bus Inputs and Outputs
- Short-Circuit Protection on Outputs
- RoHS Compliant
- ControlNet Vendor ID 806
- APPLICATIONS Industrial Networks Programmable Controllers Industrial Drives
- Industrial Networks
- Programmable Controllers
- Industrial Drives
产品概述
The SN65HVD61 is designed to meet the requirements for the driver and receiver circuitry of the ControlNet coaxial-based physical layer.These devices are single-channel circuits with one transceiver for single node operation or distributed stand-alone applications.The pull-or-pull transmitter circuit is designed to sink current from a center-tapped transformer, providing galvanic isolation from the shared bus.These devices incorporate a differential receiver (RX) with the 120 mV sensitivity needed by ControlNet industrial applications.A secondary receiver (CD) detects the presence of a valid positive differential signal.The third signal receiver function (SIG) provides a scaled analog output which is proportional to the differential voltage between XF1 and XF3. This output can be used for diagnostic purposes.
SN65HVD61DR 电路图
