SN65HVD30MDREP 供应商
-
SN65HVD30MDREP
品牌：TI 封装/批号：原厂原装/22+ -
SN65HVD30MDREPG4
品牌：TI/德州仪器 封装/批号：SOP-8/2024 -
SN65HVD30MDREPG4
品牌：TI(德州仪器) 封装/批号：SOIC-8/2022+
SN65HVD30MDREP 属性参数
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：接口 - 驱动器，接收器，收发器
- 系列：-
- 类型：收发器
- 驱动器/接收器数：1/1
- 规程：RS422，RS485
- 电源电压：3 V ~ 3.6 V
- 安装类型：表面贴装
- 封装/外壳：8-SOIC（0.154"，3.90mm 宽）
- 供应商设备封装：8-SOIC
- 包装：®
- 其它名称：296-22238-6
产品特性
- 1/8 Unit-Load Option Available (up to 256 Nodes on the Bus)
- Bus-Pin ESD Protection Exceeds 15 kV HBM
- Optional Driver Output Transition Times for Signaling Rates(1) of 1 Mbps, 5 Mbps, and 25 Mbps
- Low-Current Standby Mode: <1 µA
- Glitch-Free Power-Up and Power-Down Protection for Hot-Plugging Applications
- 5-V Tolerant Inputs
- Bus Idle, Open, and Short-Circuit Fail Safe
- Driver Current Limiting and Thermal Shutdown
- Meet or Exceed the Requirements of ANSI TIA/EIA-485-A and RS-422 Compatible
产品概述
The SN65HVD3x-EP devices are 3-state differential line drivers and differential-input
line receivers that operate with 3-V power supply.Each driver and receiver has separate input and output pins for full-duplex bus
communication designs. They are designed for balanced transmission lines and interoperation with
ANSI TIA/EIA-485A, TIA/EIA-422-B, ITU-T v.11, and ISO 8482:1993 standard-compliant devices.The SN65HVD30, SN65HVD31, and SN65HVD32 are fully enabled with no external enabling
pins.The SN65HVD33, SN65HVD34, and SN65HVD35 have active-high driver enables and active-low
receiver enables. A low (less than 1 µA) standby current can be achieved by disabling both the
driver and receiver.All devices are characterized for operation from –55°C to 125°C.
SN65HVD30MDREP 数据手册
SN65HVD30MDREP
SN65HVD30MDREP 电路图
