IC元器件

PCM2901E

参考价格:$10.6-$9.01

Texas Instruments 接口 - 编解码器

PCM2901E 供应商

PCM2901E 属性参数

  • 标准包装:47
  • 类别:集成电路 (IC)
  • 家庭:接口 - 编解码器
  • 系列:-
  • 类型:立体声音频
  • 数据接口:USB
  • 分辨率(位):16 b
  • ADC / DAC 数量:2 / 2
  • 三角积分调变:
  • S/N 比,标准 ADC / DAC (db):89 / 96
  • 动态范围,标准 ADC / DAC (db):89 / 93
  • 电压 - 电源,模拟:3 V ~ 3.6 V
  • 电压 - 电源,数字:3 V ~ 3.6 V
  • 工作温度:-25°C ~ 85°C
  • 安装类型:表面贴装
  • 封装/外壳:28-SSOP(0.209",5.30mm 宽)
  • 供应商设备封装:28-SSOP
  • 包装:管件
  • 其它名称:296-12985-5

产品特性

  • PCM2901: Without S/PDIF
  • PCM2903: With S/PDIF
  • On-Chip USB Interface With Full-Speed Transceivers Fully Compliant With USB 1.1 Specification Certified by USB-IF Partially Programmable Descriptors(1) USB Adaptive Mode for Playback USB Asynchronous Mode for Record Self-Powered
  • With Full-Speed Transceivers
  • Fully Compliant With USB 1.1 Specification
  • Certified by USB-IF
  • Partially Programmable Descriptors(1)
  • USB Adaptive Mode for Playback
  • USB Asynchronous Mode for Record
  • Self-Powered
  • 16-Bit Delta-Sigma ADC and DAC
  • Sampling Rates DAC: 32, 44.1, 48 kHz ADC: 8, 11.025, 16, 22.05, 32, 44.1, 48 kHz
  • DAC: 32, 44.1, 48 kHz
  • ADC: 8, 11.025, 16, 22.05, 32, 44.1, 48 kHz
  • On-Chip Clock Generator With Single 12-MHz Clock Source
  • Single Power Supply: 3.3 V Typical
  • Stereo ADC Analog Performance at VCCC = VCCP1 = VCCP2 = VCCX = VDD = 3.3 V THD+N = 0.01% SNR = 89 dB Dynamic Range = 89 dB Decimation Digital Filter Pass-Band Ripple = ±0.05 dB Stop-Band Attenuation = –65 dB Single-Ended Voltage Input Antialiasing Filter Included Digital LCF Included
  • Analog Performance at VCCC = VCCP1 = VCCP2 = VCCX = VDD = 3.3 V THD+N = 0.01% SNR = 89 dB Dynamic Range = 89 dB
  • THD+N = 0.01%
  • SNR = 89 dB
  • Dynamic Range = 89 dB
  • Decimation Digital Filter Pass-Band Ripple = ±0.05 dB Stop-Band Attenuation = –65 dB
  • Pass-Band Ripple = ±0.05 dB
  • Stop-Band Attenuation = –65 dB
  • Single-Ended Voltage Input
  • Antialiasing Filter Included
  • Digital LCF Included
  • Stereo DAC Analog Performance at VCCC = VCCP1 = VCCP2 = VCCX = VDD = 3.3 V THD+N = 0.005% SNR = 96 dB Dynamic Range = 93 dB Oversampling Digital Filter Pass-Band Ripple = ±0.1 dB Stop-Band Attenuation = –43 dB Single-Ended Voltage Output Analog LPF Included
  • Analog Performance at VCCC = VCCP1 = VCCP2 = VCCX = VDD = 3.3 V THD+N = 0.005% SNR = 96 dB Dynamic Range = 93 dB
  • THD+N = 0.005%
  • SNR = 96 dB
  • Dynamic Range = 93 dB
  • Oversampling Digital Filter Pass-Band Ripple = ±0.1 dB Stop-Band Attenuation = –43 dB
  • Pass-Band Ripple = ±0.1 dB
  • Stop-Band Attenuation = –43 dB
  • Single-Ended Voltage Output
  • Analog LPF Included
  • Multifunctions Human Interface Device (HID) Volume ± Control and Mute Control Suspend Flag
  • Human Interface Device (HID) Volume ± Control and Mute Control
  • Suspend Flag
  • Package: 28-Pin SSOP
  • APPLICATIONS USB Audio Speaker USB Headset USB Monitor USB Audio Interface Box
  • USB Audio Speaker
  • USB Headset
  • USB Monitor
  • USB Audio Interface Box

产品概述

The PCM2901/2903 is TI’s single-chip USB stereo audio codec with USB-compliant full-speed protocol controller and S/PDIF (only PCM2903). The USB protocol controller works with no software code, but the USB descriptors can be modified in some areas (for example, vendor ID/product ID). The PCM2901/2903 employs SpAct™ architecture, TI’s unique system that recovers the audio clock from USB packet data. On-chip analog PLLs with SpAct enable playback and record with low clock jitter and with independent playback and record sampling rates.