LP3856ET-ADJ 供应商
-
LP3856ET-ADJ
品牌:TI 封装/批号:原厂原装/22+ -
LP3856ET-ADJ
品牌:NSC 封装/批号:/ -
LP3856ET-ADJ
品牌:NS/ELNAF 封装/批号:ZIP5/1927+
LP3856ET-ADJ 属性参数
- 制造商:National Semiconductor (TI)
- 最大输入电压:7 V
- 回动电压(最大值):0.055 V at 300 mA
- 输出电流:3 A
- 负载调节:0.08 %
- 输出端数量:1
- 输出类型:Adjustable
- 最大工作温度:+ 125 C
- 安装风格:Through Hole
- 封装 / 箱体:TO-220
- 线路调整率:0.02 %
- 最小工作温度:- 40 C
- 封装:Tube
- 参考电压:1.216 V
- 工厂包装数量:45
产品特性
- Ultra Low Dropout Voltage
- Stable with Selected Ceramic Capacitors
- Low Ground Pin Current
- Load Regulation of 0.08%
- 10nA Quiescent Current in Shutdown Mode
- Specified Output Current of 3A DC
- Available in DDPAK/TO-263 and TO-220 Packages
- Overtemperature/Overcurrent Protection
- −40°C to +125°C Junction Temperature Range
产品概述
The LP3856-ADJ fast ultra low-dropout linear regulators operate from a +2.5V to +7.0V
input supply. These ultra low dropout linear regulators respond very quickly to step changes in
load, which makes them suitable for low voltage microprocessor applications. The LP3856-ADJ is
developed on a CMOS process which allows low quiescent current operation independent of output load
current. This CMOS process also allows the LP3856-ADJ to operate under extremely low dropout
conditions.Dropout Voltage: Ultra low dropout voltage; typically
39mV at 300mA load current and 390mV at 3A load current.Ground Pin Current: Typically 4mA at 3A load
current.Shutdown Mode: Typically 10nA quiescent current when the
shutdown pin is pulled low.Adjustable Output Voltage: The output voltage may be
programmed via two external resistors.
LP3856ET-ADJ 数据手册
LP3856ET-ADJ 电路图