LP3855EMP-1.8/NOPB 供应商
-
LP3855EMP-1.8/NOPB
品牌:TI 封装/批号:原厂原装/22+ -
LP3855EMP-1.8/NOPB
品牌:TI(德州仪器) 封装/批号:SOT-223-5/2022+
LP3855EMP-1.8/NOPB 属性参数
- 制造商:National Semiconductor (TI)
- 最大输入电压:7 V
- 输出电压:1.8 V
- 回动电压(最大值):0.035 V at 150 mA, 0.32 V at 1.5A
- 输出电流:1.5 A
- 负载调节:0.06 %
- 输出端数量:1
- 输出类型:Fixed
- 最大工作温度:+ 125 C
- 安装风格:SMD/SMT
- 封装 / 箱体:SOT-223
- 线路调整率:0.02 %
- 最小工作温度:- 40 C
- 封装:Reel
- 工厂包装数量:1000
- 电压调节准确度:+/- 1.5 %
产品特性
- Input Supply Voltage: 2.5 V to 7 V
- Ultra-Low Dropout Voltage
- Stable with Selected Ceramic Capacitors
- Low Ground-Pin Current
- Load Regulation of 0.06%
- 10-nA Quiescent Current in Shutdown Mode
- Specified Output Current of 1.5 A DC
- Output Voltage Accuracy ± 1.5%
- ERROR Pin Indicates Output Status
- SENSE Option Improves Load Regulation
- Overtemperature/Overcurrent Protection
- −40°C to 125°C Junction Temperature Range
产品概述
The LP3852 and LP3855 series of fast ultra-low dropout linear regulators operate from a
2.5-V to 7-V input supply. A wide range of preset output voltage options are available. These
ultra-low dropout linear regulators respond very quickly to step changes in load, which makes them
suitable for low voltage microprocessor applications. The LP3852 and LP3855 are developed on a CMOS
process which allows low quiescent-current operation independent of output load current, typically
4 mA at 1.5-A load current. This CMOS process also allows the LP3852 and LP3855 to operate under
extremely low dropout conditions, typically 24 mV at 150-mA load current and 240 mV at 1.5-A load
current.The LP3852 has an ERROR pin; it goes low when the output voltage
drops 10% below nominal value. The LP3855 has a SENSE pin to improves regulation at remote
loads.The LP3852 and LP3855 are available with fixed output voltages from 1.8 V to 5 V with a
specified accuracy of ±1.5% at room temperature, and ±3% over all conditions (varying line, load,
and temperature). Contact Texas Instruments Sales for specific voltage option needs.
LP3855EMP-1.8/NOPB 电路图