LP2985AIM5X-1.8/NOPB 供应商
-
LP2985AIM5X-1.8/NOPB
品牌：TI 封装/批号：原厂原装/22+ -
LP2985AIM5X-1.8/NOPB
品牌：TI/德州仪器 封装/批号：SOT23-5/21+ -
LP2985AIM5X-1.8/NOPB
品牌：TI(德州仪器) 封装/批号：SOT23-5/2022+ -
LP2985AIM5X-1.8/NOPB
品牌：TI 封装/批号：/2021+
LP2985AIM5X-1.8/NOPB 属性参数
- 制造商：National Semiconductor (TI)
- 最大输入电压：16 V
- 输出电压：1.8 V
- 回动电压（最大值）：0.15 V at 50 mA, 0.35 V at 150 mA
- 输出电流：0.15 A
- 输出端数量：1
- 输出类型：Fixed
- 最大工作温度：+ 125 C
- 安装风格：SMD/SMT
- 封装 / 箱体：SOT-23
- 线路调整率：0.014 % / V
- 最小工作温度：- 40 C
- 封装：Reel
- 工厂包装数量：3000
- 电压调节准确度：+/- 2.5 %
产品特性
- Wide Supply Voltage Range: 2.2 V to 16 V
- Ensured 150-mA Output Current
- Requires Minimum External Components
- Stable With Low-ESR Output Capacitor
- < 1-µA Quiescent Current When Shut Down
- Low Ground Pin Current at all Loads
- Output Voltage Accuracy 1% (A Grade)
- High Peak Current Capability
- Low ZOUT: 0.3-Ω Typical (10 Hz to 1 MHz)
- Overtemperature/Overcurrent Protection
- −40°C to +125°C Junction Temperature Range
产品概述
The LP2985LV-N is a 150-mA, fixed-output voltage regulator designed to provide high
performance and low noise in applications requiring output voltages ≤ 2 V.Using an optimized vertically integrated PNP (VIP) process, the LP2985LV-N delivers
unequaled performance in all specifications critical to battery-powered designs:
Ground Pin Current: Typically 825 µA at 150-mA load, and 75
µA at 1-mA load.
Enhanced Stability: The LP2985LV-N is stable with output
capacitor equivalent series resistance (ESR) as low as 5 mΩ, which allows the use of ceramic
capacitors on the output.Sleep Mode: Less than 1-µA
quiescent current when ON/OFF pin is pulled low.Precision
Output: 1% tolerance output voltages available (A grade). Low Noise: By adding a 10-nF bypass capacitor, output noise can be reduced to
30 µV (typical).
LP2985AIM5X-1.8/NOPB 电路图
