LME49600TS/NOPB 供应商
-
LME49600TS/NOPB
品牌：TI 封装/批号：原厂原装/22+ -
LME49600TS/NOPB
品牌：TI(德州仪器) 封装/批号：TO-263/2022+ -
LME49600TS/NOPB
品牌：NSC 封装/批号：原厂原封装/新批号
LME49600TS/NOPB 属性参数
- 制造商：National Semiconductor (TI)
- 通道数量：1
- 输入补偿电压：60 mV at +/- 15 V
- 安装风格：SMD/SMT
- 封装 / 箱体：TO-263
- 转换速度：2000 V/us at +/- 15 V
- 关闭：Yes
- 最大工作温度：+ 85 C
- 封装：Tube
- 最小工作温度：- 40 C
- 工厂包装数量：45
- 电源电流：14.5 mA
- 技术：Bipolar
- 电压增益 dB：0.09 dB
产品特性
- Pin-Selectable Bandwidth and Quiescent Current
- Pure Fidelity, Pure Performance
- Short Circuit Protection
- Thermal Shutdown
- TO–263 Surface-Mount Package
- Low THD+N (VOUT = 3VRMS, f = 1kHz, ): 0.00003% (typ)
- Slew Rate: 2000V/μs (typ)
- High Output Current: 250mA (typ)
- Bandwidth BW Pin Floating: 110MHz (typ) BW Connected to VEE: 180MHz (typ)
- BW Pin Floating: 110MHz (typ)
- BW Connected to VEE: 180MHz (typ)
- Supply Voltage Range: ±2.25V ≤ VS ≤ ±18V
产品概述
The LME49600 is a high performance, low distortion high fidelity 250mA audio buffer. The
LME49600 is designed for a wide range of applications. It can be used inside the feedback loop of
op amps.The LME49600 offers a pin-selectable bandwidth: a low current, 110MHz bandwidth mode that
consumes 7.3mA and a wide 180MHz bandwidth mode that consumes 13.2mA. In both modes the LME49600
has a nominal 2000V/μs slew rate. Bandwidth is easily adjusted by either leaving the BW pin
unconnected or connecting a resistor between the BW pin and the VEE
pin.The LME49600 is fully protected through internal current limit and thermal
shutdown.
LME49600TS/NOPB 电路图
