LM809M3-2.63/NOPB 供应商
-
LM809M3-2.63/NOPB
品牌：TI 封装/批号：原厂原装/22+ -
LM809M3-2.63/NOPB
品牌：TI/德州仪器 封装/批号：SOT-23-3/2024 -
LM809M3-2.63/NOPB
品牌：TI(德州仪器) 封装/批号：SOT-23-3/2022+ -
LM809M3-2.63/NOPB
品牌：NSC 封装/批号：SSOP/23+ -
LM809M3-2.63/NOPB
品牌：TI 封装/批号：原厂原装/2318+
LM809M3-2.63/NOPB 属性参数
- 制造商：National Semiconductor (TI)
- 监测电压数：1
- 监测电压：2.63 V
- 欠电压阈值：2.55 V
- 过电压阈值：3 V
- 输出类型：Active Low
- 人工复位：Not Resettable
- 监视器：No Watchdog
- 电池备用开关：No Backup
- 上电复位延迟（典型值）：240 ms
- Supply Voltage - Max：5.5 V
- Supply Voltage - Min：1.2 V
- 电源电流（典型值）：100 uA
- 最大功率耗散：320 mW
- 最大工作温度：+ 105 C
- 安装风格：SMD/SMT
- 封装 / 箱体：SOT-23
- 封装：Reel
- 最小工作温度：- 40 C
- 功率失效检测：No
- 工厂包装数量：1000
产品特性
- Precision Monitoring of Supply Voltages Available Threshold Options: 2.63 V, 2.93 V, 3.08 V, 4.38 V, 4.63 V
- Available Threshold Options: 2.63 V, 2.93 V, 3.08 V, 4.38 V, 4.63 V
- Superior Upgrade to MAX809 and MAX810
- Fully Specified Over Temperature
- 140-ms Minimum Power-On Reset Pulse Width, 240-ms Typical Active-Low RESET Output (LM809) Active-High RESET Output (LM810)
- Active-Low RESET Output (LM809)
- Active-High RESET Output (LM810)
- Ensured RESET Output Valid for VCC ≥ 1 V
- Low Supply Current, 15-µA Typical
- Power Supply Transient Immunity
产品概述
The LM809 and LM810 microprocessors supervisory circuits can be used to monitor the power
supplies in microprocessor and digital systems. They provide a reset to the microprocessor during
power-up, power-down and brown-out conditions.The function of the LM809 and LM810 are to monitor the VCC supply
voltage, and assert a reset signal whenever this voltage declines below the factory-programmed
reset threshold. The reset signal remains asserted for 240 ms after VCC
rises above the threshold. The LM809 has an active-low RESET output, while
the LM810 has an active-high RESET output.Seven standard reset voltage options are available, suitable for monitoring 5-V, 3.3-V,
and 3-V supply voltages.With a low supply current of only 15 µA, the LM809 and LM810 are ideal for use in
portable equipment.
LM809M3-2.63/NOPB 电路图
