LF356H 供应商
LF356H 属性参数
- 制造商:National Semiconductor (TI)
 - 通道数量:1
 - 共模抑制比(最小值):80 dB
 - 输入补偿电压:10 mV at +/- 15 V
 - 安装风格:Through Hole
 - 封装 / 箱体:TO-99
 - 转换速度:12 V/us at +/- 15 V
 - 关闭:No
 - 最大工作温度:+ 70 C
 - 封装:Bulk
 - 最小工作温度:0 C
 - 工厂包装数量:500
 - 电源电流:10 mA at +/- 15 V
 - 技术:BiFET
 - 电压增益 dB:106.02 dB
 
产品特性
- Advantages Replace Expensive Hybrid and Module FET Op AmpsRugged JFETs Allow Blow-Out Free Handling Compared With MOSFET Input DevicesExcellent for Low Noise Applications Using Either High or Low Source Impedance—Very Low 1/f CornerOffset Adjust Does Not Degrade Drift or Common-Mode Rejection as in Most Monolithic AmplifiersNew Output Stage Allows Use of Large Capacitive Loads (5,000 pF) Without Stability ProblemsInternal Compensation and Large Differential Input Voltage Capability
 - Replace Expensive Hybrid and Module FET Op Amps
 - Rugged JFETs Allow Blow-Out Free Handling Compared With MOSFET Input Devices
 - Excellent for Low Noise Applications Using Either High or Low Source Impedance—Very Low 1/f Corner
 - Offset Adjust Does Not Degrade Drift or Common-Mode Rejection as in Most Monolithic Amplifiers
 - New Output Stage Allows Use of Large Capacitive Loads (5,000 pF) Without Stability Problems
 - Internal Compensation and Large Differential Input Voltage Capability
 - Common Features Low Input Bias Current: 30 pALow Input Offset Current: 3 pAHigh Input Impedance: 1012 ΩLow Input Noise Current: 0.01 pA/√Hz High Common-Mode Rejection Ratio: 100 dBLarge DC Voltage Gain: 106 dB
 - Low Input Bias Current: 30 pA
 - Low Input Offset Current: 3 pA
 - High Input Impedance: 1012 Ω
 - Low Input Noise Current: 0.01 pA/√Hz
 - High Common-Mode Rejection Ratio: 100 dB
 - Large DC Voltage Gain: 106 dB
 - Uncommon Features Extremely Fast Settling Time to 0.01%: 1.5 µsFast Slew Rate: 12 V/µs Wide Gain Bandwidth: 5 MHz Low Input Noise Voltage: 12 nV/√Hz
 - Extremely Fast Settling Time to 0.01%: 1.5 µs
 - Fast Slew Rate: 12 V/µs
 - Wide Gain Bandwidth: 5 MHz
 - Low Input Noise Voltage: 12 nV/√Hz
 
产品概述
												The LF356-MIL device are the first monolithic JFET input operational amplifiers to
		incorporate well-matched, high-voltage JFETs on the same chip with standard bipolar transistors
		(BI-FET™ Technology). These amplifiers feature low
		input bias and offset currents/low offset voltage and offset voltage drift, coupled with offset
		adjust, which does not degrade drift or common-mode rejection. The devices are also designed for
		high slew rate, wide bandwidth, extremely fast settling time, low voltage and current noise and a
		low 1/f noise corner.
											
											
										LF356H 电路图