CC1110F8RHHT 供应商
-
CC1110F8RHHT
品牌：TI 封装/批号：原厂原装/22+ -
CC1110F8RHHT
品牌：TI(德州仪器) 封装/批号：VQFN-36(6x6)/2022+
CC1110F8RHHT 属性参数
- 现有数量：250现货
- 价格：1 : ￥47.78000剪切带（CT）250 : ￥32.87188卷带（TR）
- 系列：-
- 包装：卷带（TR）剪切带（CT）? 得捷定制卷带
- 产品状态：在售
- 类型：TxRx + MCU
- 射频系列/标准：通用 ISM < 1GHz
- 协议：-
- 调制：2FSK，ASK，GFSK，MSK，OOK
- 频率：300MHz ~ 348MHz，391MHz ~ 464MHz，782MHz ~ 928MHz
- 数据速率（最大值）：500kBaud
- 功率 - 输出：10dBm
- 灵敏度：-112dBm
- 存储容量：8kB 闪存，1kB SRAM
- 串行接口：I2S，USART
- GPIO：21
- 电压 - 供电：2V ~ 3.6V
- 电流 - 接收：16.2mA ~ 21.5mA
- 电流 - 传输：18mA ~ 36.2mA
- 工作温度：-40°C ~ 85°C
- 安装类型：表面贴装型
- 封装/外壳：36-VFQFN 裸露焊盘
- 供应商器件封装：36-VQFN（6x6）
产品特性
- Radio High-performance RF transceiver based on the market-leading CC1101 Excellent receiver selectivity and blocking performance High sensitivity (–110 dBm at 1.2 kBaud) Programmable data rate up to 500 kBaud Programmable output power up to 10 dBm for all supported frequencies Frequency range: 300 – 348 MHz, 391 – 464 MHz and 782 – 928 MHz Digital RSSI / LQI support
- High-performance RF transceiver based on the market-leading CC1101
- Excellent receiver selectivity and blocking performance
- High sensitivity (–110 dBm at 1.2 kBaud)
- Programmable data rate up to 500 kBaud
- Programmable output power up to 10 dBm for all supported frequencies
- Frequency range: 300 – 348 MHz, 391 – 464 MHz and 782 – 928 MHz
- Digital RSSI / LQI support
- Low Power Low current consumption (RX: 16.2 mA at 1.2 kBaud, TX: 15.2 mA at −6 dBm output power) 0.3 µA in PM3 (the operating mode with the lowest power consumption) 0.5 µA in PM2 (operating mode with the second lowest power consumption, timer or external interrupt wakeup) RoHS Compliant 6 mm × 6 mm QFN-40 Package
- Low current consumption (RX: 16.2 mA at 1.2 kBaud, TX: 15.2 mA at −6 dBm output power)
- 0.3 µA in PM3 (the operating mode with the lowest power consumption)
- 0.5 µA in PM2 (operating mode with the second lowest power consumption, timer or external interrupt wakeup)
- RoHS Compliant 6 mm × 6 mm QFN-40 Package
- MCU, Memory, and Peripherals High performance and low power 8051 microcontroller core. Powerful DMA functionality 8/16/32 KB in-system programmable flash, and 1, 2, 4 KB RAM Full-Speed USB Controller with 1 KB FIFO (CC1111Fx) 128-bit AES security coprocessor 7 – 12 bit ADC with up to eight inputs I2S interface Two USARTs 16-bit timer with DSM mode Three 8-bit timers Hardware debug support 21 (CC1110Fx) or 19 (CC1111Fx) GPIO pins SW compatible with CC2510Fx, CC2511Fx
- High performance and low power 8051 microcontroller core.
- Powerful DMA functionality
- 8/16/32 KB in-system programmable flash, and 1, 2, 4 KB RAM
- Full-Speed USB Controller with 1 KB FIFO (CC1111Fx)
- 128-bit AES security coprocessor
- 7 – 12 bit ADC with up to eight inputs
- I2S interface
- Two USARTs
- 16-bit timer with DSM mode
- Three 8-bit timers
- Hardware debug support
- 21 (CC1110Fx) or 19 (CC1111Fx) GPIO pins
- SW compatible with CC2510Fx, CC2511Fx
- General Wide supply voltage range (2.0V – 3.6V) RoHS compliant 6×6 mm QFN 36 package
- Wide supply voltage range (2.0V – 3.6V)
- RoHS compliant 6×6 mm QFN 36 package
产品概述
The CC1110Fx, CC1111Fx is a true low-power sub- 1 GHz system-on-chip (SoC) designed for
low power wireless applications. The CC1110Fx, CC1111Fx combines the excellent performance of the
state-of-the-art RF transceiver CC1101 with an industry-standard enhanced 8051 MCU, up to 32 kB of
in-system programmable flash memory and up to 4 kB of RAM, and many other powerful features. The
small 6x6 mm package makes it very suited for applications with size limitations.The CC1110Fx, CC1111Fx is highly suited for systems where very low power consumption is
required. This is ensured by several advanced low-power operating modes. The CC1111Fx adds a
full-speed USB 2.0 interface to the feature set of the CC1110Fx. Interfacing to a PC using the USB
interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the
bottlenecks of RS-232 or low-speed USB interfaces.
CC1110F8RHHT 电路图
