CAVC16T245QDGVRQ1 供应商
-
CAVC16T245QDGVRQ1
品牌：TI 封装/批号：TVSOP48/23+ -
CAVC16T245QDGVRQ1
品牌：TI/德州仪器 封装/批号：TVSOP48/21+ -
CAVC16T245QDGVRQ1
品牌：TI(德州仪器) 封装/批号：TVSOP-48/2022+
CAVC16T245QDGVRQ1 属性参数
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：逻辑 - 变换器
- 系列：74AVC
- 逻辑功能：变换器，双向，3 态
- 位数：16
- 输入类型：逻辑
- 输出类型：逻辑
- 数据速率：380Mbps
- 通道数：2
- 输出/通道数目：8
- 差分 - 输入:输出：无/无
- 传输延迟（最大）：5.7ns
- 电源电压：1.2 V ~ 3.6 V
- 工作温度：-40°C ~ 125°C
- 封装/外壳：48-TFSOP（0.173"，4.40mm 宽）
- 供应商设备封装：48-TVSOP
- 包装：®
- 其它名称：296-23876-6
产品特性
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results: Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range Device HBM ESD Classification Level H3B (JESD 22 A114-A) Device CDM ESD Classification Level C5 (JESD 22 C101)
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level H3B (JESD 22 A114-A)
- Device CDM ESD Classification Level C5 (JESD 22 C101)
- Control Inputs VIH/VIL Levels Are Referenced to VCCA Voltage
- VCC Isolation Feature – If Either VCC Input is at GND, Both Ports Are in the High-Impedance State
- Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.2V to 3.6V Power-Supply Range
- Ioff Supports Partial-Power-Down Mode Operation
- I/Os Are 4.6V Tolerant
- Maximum Data Rates 380Mbps (1.8V to 3.3V Translation) 200Mbps (<1.8V to 3.3V Translation) 200Mbps (Translate to 2.5V or 1.8V) 150Mbps (Translate to 1.5V) 100Mbps (Translate to 1.2V)
- 380Mbps (1.8V to 3.3V Translation)
- 200Mbps (<1.8V to 3.3V Translation)
- 200Mbps (Translate to 2.5V or 1.8V)
- 150Mbps (Translate to 1.5V)
- 100Mbps (Translate to 1.2V)
- Latch-Up Performance Exceeds 100mA Per JESD 78, Class II
产品概述
The SN74AVC16T245-Q1 is a 16-bit
noninverting bus transceiver that uses two separate configurable power-supply rails.
The SN74AVC16T245-Q1 is optimized to operate with VCCA or VCCB
set at 1.4V to 3.6V. It is operational with VCCA or VCCB as
low as 1.2V. The A port is designed to track VCCA. VCCA
accepts any supply voltage from 1.2V to 3.6V. The B port is designed to track
VCCB. VCCB accepts any supply voltage from 1.2V to 3.6V.
This allows for universal low-voltage bidirectional translation between any of the
1.2V, 1.5V, 1.8V, 2.5V, and 3.3V voltage nodes.The SN74AVC16T245-Q1 is designed for
asynchronous communication between data buses. The device transmits data from the A
bus to the B bus or from the B bus to the A bus, depending on the logic level at the
direction-control (DIR) input. The output-enable ( OE) input
can be used to disable the outputs so the buses effectively are isolated.