BQ24150AYFFT 供应商
-
BQ24150AYFFT
品牌：TI 封装/批号：原厂原装/22+ -
BQ24150AYFFT
品牌：TI 封装/批号：原厂原装/2318+
BQ24150AYFFT 属性参数
- 视频文件：bq24150 Fully Integrated Switch-Mode One-Cell Li-Ion Charger
- 标准包装：1
- 类别：集成电路 (IC)
- 家庭：PMIC - 电池管理
- 系列：-
- 功能：充电管理
- 电池化学：锂离子（Li-Ion）、锂聚合物（Li-Pol）
- 电源电压：4 V ~ 6 V
- 工作温度：-40°C ~ 85°C
- 安装类型：表面贴装
- 封装/外壳：20-UFBGA，DSBGA
- 供应商设备封装：20-DSBGA
- 包装：®
- 其它名称：296-24546-6
产品特性
- Charge Faster than Linear Chargers
- High-Accuracy Voltage and Current Regulation Input Current Regulation Accuracy: ±5% (100 mA and 500 mA) Charge Voltage Regulation Accuracy: ±0.5% (25°C), ±1% (0°C to 125°C) Charge Current Regulation Accuracy: ±5%
- Input Current Regulation Accuracy: ±5% (100 mA and 500 mA)
- Charge Voltage Regulation Accuracy: ±0.5% (25°C), ±1% (0°C to 125°C)
- Charge Current Regulation Accuracy: ±5%
- High-Efficiency Mini-USB/AC Battery Charger for Single-Cell Li-Ion and Li-Polymer Battery Packs
- 20-V Absolute Maximum Input Voltage Rating
- 6-V Maximum Operating Input Voltage
- Built-In Input Current Sensing and Limiting
- Integrated Power FETs for Up To 1.25-A Charge Rate
- Programmable Charge Parameters through I2C Interface (up to 3.4 Mbps): Input Current Fast-Charge/Termination Current Charge Voltage (3.5 V to 4.44 V) Safety Timer with Reset Control Termination Enable
- Input Current
- Fast-Charge/Termination Current
- Charge Voltage (3.5 V to 4.44 V)
- Safety Timer with Reset Control
- Termination Enable
- Synchronous Fixed-Frequency PWM Controller Operating at 3 MHz With 0% to 99.5% Duty Cycle
- Robust Protection Reverse Leakage Protection Prevents Battery Drainage Thermal Regulation and Protection Input/Output Overvoltage Protection
- Reverse Leakage Protection Prevents Battery Drainage
- Thermal Regulation and Protection
- Input/Output Overvoltage Protection
- Status Output for Charging and Faults
- Automatic High Impedance Mode for Low Power Consumption
- USB Friendly Boot-Up Sequence
- Automatic Charging – bq24150A
- Automatic High Impedance Mode – bq24151A
- Boost Mode Operation for USB OTG: Input Voltage Range (from Battery): 2.5 V to 4.5 V Output for VBUS: 5.05 V/ 200 mA
- Input Voltage Range (from Battery): 2.5 V to 4.5 V
- Output for VBUS: 5.05 V/ 200 mA
- 2 x 2 mm 20-Pin WCSP Package
- APPLICATIONS Mobile and Smart Phones MP3 Players Handheld Devices
- Mobile and Smart Phones
- MP3 Players
- Handheld Devices
产品概述
The bq24150A/1A is a compact, flexible, high-efficiency, USB-friendly switch-mode charge management device for single-cell Li-ion and Li-polymer batteries used in a wide range of portable applications. The charge parameters can be programmed through an I2C interface. The bq24150A/1A integrates a synchronous PWM controller, power MOSFETs, input current sensing, high-accuracy current and voltage regulation, and charge termination, into a small WCSP package.The bq24150A/1A charges the battery in three phases: conditioning, constant current and constant voltage. The input current is automatically limited to the value set by the host. Charge is terminated based on user-selectable minimum current level. A safety timer with reset control provides a safety backup for I2C interface. During normal operation, bq24150A/1A automatically restarts the charge cycle if the battery voltage falls below an internal threshold and automatically enters sleep mode or high impedance mode when the input supply is removed. The charge status is reported to the host using the I2C interface. During the charging process, the bq24150A/1A monitors its junction temperature (TJ) and reduces the charge current once TJ increases to approximately 125°C. To support USB OTG device, bq24150A/1A provides VBUS (approximately 5.05 V) by boosting the battery voltage. The bq24150A/1A is available in 20-pin WCSP package.