ADC121S101CIMF/NOPB 供应商
-
ADC121S101CIMF/NOPB
品牌：TI 封装/批号：原厂原装/22+ -
ADC121S101CIMF/NOPB
品牌：TI/德州仪器 封装/批号：SOT23-6/21+ -
ADC121S101CIMF/NOPB
品牌：TI(德州仪器) 封装/批号：SOT-23-6/2022+ -
ADC121S101CIMF/NOPB
品牌：TI 封装/批号：SOT/新批号
ADC121S101CIMF/NOPB 属性参数
- 制造商：National Semiconductor (TI)
- 转换器数量：1
- ADC 输入端数量：1
- 结构：SAR
- 转换速率：1000 KSPs
- 分辨率：12 bit
- 输入类型：Voltage
- 接口类型：QSPI, SPI
- 信噪比：72.5 dB
- 电压参考：Supply
- Supply Voltage - Max：5.25 V
- Supply Voltage - Min：2.7 V
- 最大工作温度：+ 125 C
- 安装风格：SMD/SMT
- 封装 / 箱体：SOT-23
- 封装：Reel
- 最小工作温度：- 40 C
- 工作电源电压：3.3 V, 5 V
- 工厂包装数量：1000
产品特性
- Specified Over a Range of Sample Rates
- 6-Pin WSON and SOT-23 Packages
- Variable Power Management
- Single Power Supply With 2.7 V to 5.25 V Range
- SPI™, QSPI\xE2™, MICROWIRE, and DSP Compatible
- AEC-Q100 Grade 1 Qualified
- DNL: +0.5 / –0.3 LSB (Typical)
- INL: ±0.40 LSB (Typical)
- Power Consumption: 3-V Supply: 2 mW (Typical) 5-V Supply: 10 mW (Typical)
- 3-V Supply: 2 mW (Typical)
- 5-V Supply: 10 mW (Typical)
产品概述
The ADC121S101 is a low-power, single-channel CMOS 12-bit analog-to-digital converter
with a high-speed serial interface. Unlike the conventional practice of specifying performance at a
single sample rate only, the ADC121S101 is fully specified over a sample rate range of 500 ksps to
1 Msps. The converter is based upon a successive-approximation register architecture with an
internal track-and-hold circuit.The output serial data is straight binary, and is compatible with several standards, such
as SPI™, QSPI™, MICROWIRE, and many common DSP serial interfaces.The ADC121S101 operates with a single supply with a range from 2.7 V to 5.25 V. Normal
power consumption using a 3 V or 5 V supply is 2 mW and 10 mW, respectively. The power-down feature
reduces the power consumption to as low as 2.6 µW using a 5-V supply.The ADC121S101 is packaged in 6-pin WSON and SOT-23 packages. Operation over the
temperature range of –40°C to 125°C is specified.
ADC121S101CIMF/NOPB 电路图
