ADC10738CIWM/NOPB 供应商
-
ADC10738CIWM/NOPB
品牌：TI 封装/批号：原厂原装/22+ -
ADC10738CIWM/NOPB
品牌：TI 封装/批号：原厂原封装/新批号
ADC10738CIWM/NOPB 属性参数
- 制造商：National Semiconductor (TI)
- 转换器数量：1
- ADC 输入端数量：8 or 8 or 4
- 结构：SAR
- 转换速率：74 KSPs
- 分辨率：10 bit + Sign
- 输入类型：Voltage
- 接口类型：Serial (Microwire)
- 信噪比：Yes
- 电压参考：Internal, External
- Supply Voltage - Max：5.5 V
- Supply Voltage - Min：4.5 V
- 最大功率耗散：500 mW
- 最大工作温度：+ 85 C
- 安装风格：SMD/SMT
- 封装 / 箱体：SOIC-24 Wide
- 封装：Tube
- 最小工作温度：- 40 C
- 工作电源电压：5 V
- 工厂包装数量：30
产品特性
- 0V to Analog Supply Input Range
- Serial I/O (MICROWIRE Compatible)
- Software or Hardware Power Down
- Analog Input Sample/Hold Function
- Ratiometric or Absolute Voltage Referencing
- No Zero or Full Scale Adjustment Required
- No Missing Codes Over Temperature
- TTL/CMOS Input/Output Compatible
- Resolution 10 Bits Plus Sign
- Single Supply 5 V
- Power Consumption 37 mW (Max)
- In Power Down Mode 18 μW
- Conversion Time 5 μs (Max)
- Sampling Rate 74 kHz (Max)
- Band-Gap Reference 2.5V ±2% (Max)
产品概述
The ADC10731, ADC10732 and ADC10734 are obsolete or on lifetime buy
and included for reference only.This series of CMOS 10-bit plus sign successive approximation A/D converters features
versatile analog input multiplexers, sample/hold and a 2.5V band-gap reference. The 1-, 2-, 4-, or
8-channel multiplexers can be software configured for single-ended or differential mode of
operation.An input sample/hold is implemented by a capacitive reference ladder and sampled-data
comparator. This allows the analog input to vary during the A/D conversion cycle.In the differential mode, valid outputs are obtained even when the negative inputs are
greater than the positive because of the 10-bit plus sign output data format.The serial I/O is configured to comply with the MICROWIRE serial data exchange standard
for easy interface to the COPS and HPC families of controllers, and can easily interface with
standard shift registers and microprocessors.
ADC10738CIWM/NOPB 数据手册
ADC10738CIWM/NOPB
ADC10738CIWM/NOPB 电路图
