ADC08832IM/NOPB 供应商
-
ADC08832IM/NOPB
品牌：TI 封装/批号：原厂原装/22+ -
ADC08832IM/NOPB
品牌：TI(德州仪器) 封装/批号：SOIC-8/2022+
ADC08832IM/NOPB 属性参数
- 制造商：National Semiconductor (TI)
- 转换器数量：1
- ADC 输入端数量：2, 1
- 结构：SAR
- 转换速率：153 KSPs
- 分辨率：8 bit
- 输入类型：Voltage
- 接口类型：Serial (3-Wire, Microwire)
- 信噪比：48.5 dB
- 电压参考：Supply
- Supply Voltage - Max：6 V
- Supply Voltage - Min：4.5 V
- 最大工作温度：+ 85 C
- 安装风格：SMD/SMT
- 封装 / 箱体：SOIC-8 Narrow
- 封装：Tube
- 最小工作温度：- 40 C
- 工作电源电压：5 V
- 工厂包装数量：95
产品特性
- 3-Wire Serial Digital Data Link Requires Few I/O Pins
- Analog Input Track/Hold Function
- 2-Channel Input Multiplexer Option with Address Logic
- Analog Input Voltage Range from GND to VCC
- No Zero or Full Scale Adjustment Required
- TTL/CMOS Input/Output Compatible
- Superior Pin Compatible Replacement for ADC0831/2
- Resolution: 8 Bits
- Conversion Time (fC = 2 MHz): 4μs (Max)
- Power Dissipation: 8.5mW (Typ)
- Low Power Mode: 3.0mW (Typ)
- Single Supply: 5VDC
- Total Unadjusted Error: ±1LSB
- No Missing Codes over Temperature
产品概述
The ADC08831/ADC08832 are 8-bit successive approximation Analog to Digital converters
with 3-wire serial interfaces and a configurable input multiplexer for 2 channels. The serial I/O
will interface to COPSfamily of micro-controllers, PLD's, microprocessors, DSP's, or shift
registers. The serial I/O is configured to comply with the MICROWIRE serial data exchange
standard. To minimize total power consumption, the ADC08831/ADC08832 automatically go into low
power mode whenever they are not performing conversions.A track/hold function allows the analog voltage at the positive input to vary during the
actual A/D conversion.The analog inputs can be configured to operate in various combinations of single-ended,
differential, or pseudo-differential modes. The voltage reference input can be adjusted to allow
encoding of small analog voltage spans to the full 8-bits of resolution.
ADC08832IM/NOPB 数据手册
ADC08832IM/NOPB
ADC08832IM/NOPB 电路图
