ADC081S051CISD 供应商
-
ADC081S051CISD
品牌：TI 封装/批号：原厂原装/22+ -
ADC081S051CISD/NOPB
品牌：TI(德州仪器) 封装/批号：WSON-6(2.2x2.5)/2022+
ADC081S051CISD 属性参数
- 制造商：National Semiconductor (TI)
- 转换器数量：1
- ADC 输入端数量：1
- 结构：SAR
- 转换速率：500 KSPs
- 分辨率：8 bit
- 输入类型：Voltage
- 接口类型：Serial (3-Wire, SPI, QSPI, Microwire)
- 信噪比：49.6 dB
- 电压参考：Supply
- Supply Voltage - Max：5.25 V
- Supply Voltage - Min：2.7 V
- 最大工作温度：+ 85 C
- 封装 / 箱体：LLP EP
- 封装：Reel
- 最小工作温度：- 40 C
- 工作电源电压：3.3 V, 5 V
- 工厂包装数量：1000
产品特性
- Specified Over a Range of Sample Rates
- 6-lead WSON and SOT-23 Packages
- Variable Power Management
- Single Power Supply with 2.7V – 5.25V Range
- SPI™/QSPI™/MICROWIRE/DSP Compatible
- DNL: +0.06 / –0.045 LSB (Typ)
- INL: +0.06 / –0.05 LSB (Typ)
- SNR: 49.6 dB (Typ)
- Power Consumption: 3.6V Supply: 1.6 mW (Typ) 5.25V Supply: 8.5 mW (Typ)
- 3.6V Supply: 1.6 mW (Typ)
- 5.25V Supply: 8.5 mW (Typ)
产品概述
The ADC081S051 is a low-power, single channel CMOS 8-bit analog-to-digital converter with
a high-speed serial interface. Unlike the conventional practice of specifying performance at a
single sample rate only, the ADC081S051 is fully specified over a sample rate range of 200 ksps to
500 ksps. The converter is based on a successive-approximation register architecture with an
internal track-and-hold circuit.The output serial data is straight binary, and is compatible with several standards, such
as SPI™, QSPI™, MICROWIRE, and many common DSP serial interfaces.The ADC081S051 operates with a single supply that can range from +2.7V to +5.25V. Normal
power consumption using a +3.6V or +5.25V supply is 1.6 mW and 8.5 mW, respectively. The power-down
feature reduces the power consumption to as low as 2.6 µW using a +5.25V supply.The ADC081S051 is packaged in 6-lead WSON and SOT-23 packages. Operation over the
industrial temperature range of −40°C to +85°C is ensured.
ADC081S051CISD 数据手册
ADC081S051CISD
ADC081S051CISD 电路图
